remove node_modules

1 files changed, 0 insertions, 312 deletions

diff --git a/node_modules/renderkid/test/layout/Block.coffee b/node_modules/renderkid/test/layout/Block.coffee
deleted file mode 100644
index e5b5ebe38..000000000
--- a/node_modules/renderkid/test/layout/Block.coffee
+++ /dev/null
@@ -1,312 +0,0 @@
-Layout = require '../../src/Layout'
-{object} = require 'utila'
-
-{open, get, conf} = do ->
-  show = (layout) ->
-    got = layout.get()
-    got = got.replace /<[^>]+>/g, ''
-
-  defaultBlockConfig =
-    linePrependor: options: amount: 2
-
-  c = (add = {}) ->
-    object.append defaultBlockConfig, add
-
-  ret = {}
-
-  ret.open = (block, name, top = 0, bottom = 0) ->
-    config = c
-      blockPrependor: options: amount: top
-      blockAppendor: options: amount: bottom
-
-    b = block.openBlock config, name
-    b.write name + ' | top ' + top + ' bottom ' + bottom
-    b
-
-  ret.get = (layout) ->
-    layout.get().replace(/<[^>]+>/g, '')
-
-  ret.conf = (props) ->
-    config = {}
-    if props.left?
-      object.appendOnto config, linePrependor: options: amount: props.left
-
-    if props.right?
-      object.appendOnto config, lineAppendor:  options: amount: props.right
-
-    if props.top?
-      object.appendOnto config, blockPrependor: options: amount: props.top
-
-    if props.bottom?
-      object.appendOnto config, blockAppendor:  options: amount: props.bottom
-
-    if props.width?
-      object.appendOnto config, width: props.width
-
-    if props.bullet is yes
-      object.appendOnto config, linePrependor: options: bullet: {char: '-', alignment: 'left'}
-
-    config
-
-  ret
-
-
-describe "Layout", ->
-  describe "inline inputs", ->
-    it "should be merged", ->
-      l = new Layout
-
-      l.write 'a'
-      l.write 'b'
-
-      get(l).should.equal 'ab'
-
-    it "should be correctly wrapped", ->
-      l = new Layout
-      block = l.openBlock conf width: 20
-      block.write '123456789012345678901234567890'
-      block.close()
-      get(l).should.equal '12345678901234567890\n1234567890'
-
-    it "should trim from left when wrapping to a new line", ->
-      l = new Layout
-      block = l.openBlock conf width: 20
-      block.write '12345678901234567890 \t 123456789012345678901'
-      block.close()
-      get(l).should.equal '12345678901234567890\n12345678901234567890\n1'
-
-    it "should handle line breaks correctly", ->
-      l = new Layout
-      block = l.openBlock conf width: 20
-      block.write '\na\n\nb\n'
-      block.close()
-      get(l).should.equal '\na\n\nb\n'
-
-    it "should not put extra line breaks when a line is already broken", ->
-      l = new Layout
-      block = l.openBlock conf width: 20
-      block.write '01234567890123456789\n0123456789'
-      block.close()
-      get(l).should.equal '01234567890123456789\n0123456789'
-
-  describe "horizontal margins", ->
-    it "should account for left margins", ->
-      l = new Layout
-      block = l.openBlock conf width: 20, left: 2
-      block.write '01'
-      block.close()
-      get(l).should.equal '  01'
-
-    it "should account for right margins", ->
-      l = new Layout
-      block = l.openBlock conf width: 20, right: 2
-      block.write '01'
-      block.close()
-      get(l).should.equal '01  '
-
-    it "should account for both margins", ->
-      l = new Layout
-      block = l.openBlock conf width: 20, right: 2, left: 1
-      block.write '01'
-      block.close()
-      get(l).should.equal ' 01  '
-
-    it "should break lines according to left margins", ->
-      l = new Layout
-      global.tick = yes
-      block = l.openBlock conf width: 20, left: 2
-      block.write '01234567890123456789'
-      block.close()
-      global.tick = no
-      get(l).should.equal '  01234567890123456789'
-
-    it "should break lines according to right margins", ->
-      l = new Layout
-      block = l.openBlock conf width: 20, right: 2
-      block.write '01234567890123456789'
-      block.close()
-      get(l).should.equal '01234567890123456789  '
-
-    it "should break lines according to both margins", ->
-      l = new Layout
-      block = l.openBlock conf width: 20, right: 2, left: 1
-      block.write '01234567890123456789'
-      block.close()
-      get(l).should.equal ' 01234567890123456789  '
-
-    it "should break lines according to terminal width", ->
-      l = new Layout terminalWidth: 20
-      block = l.openBlock conf right: 2, left: 1
-      block.write '01234567890123456789'
-      block.close()
-
-      # Note: We don't expect ' 01234567890123456  \n 789  ',
-      # since the first line (' 01234567890123456  ') is a full line
-      # according to layout.config.terminalWidth and doesn't need
-      # a break line.
-      get(l).should.equal ' 01234567890123456   789  '
-
-  describe "lines and blocks", ->
-    it "should put one break line between: line, block", ->
-      l = new Layout
-      l.write 'a'
-      l.openBlock().write('b').close()
-      get(l).should.equal 'a\nb'
-
-    it "should put one break line between: block, line", ->
-      l = new Layout
-      l.openBlock().write('a').close()
-      l.write 'b'
-      get(l).should.equal 'a\nb'
-
-    it "should put one break line between: line, block, line", ->
-      l = new Layout
-      l.write 'a'
-      l.openBlock().write('b').close()
-      l.write 'c'
-      get(l).should.equal 'a\nb\nc'
-
-    it "margin top should work for: line, block", ->
-      l = new Layout
-      l.write 'a'
-      l.openBlock(conf top: 2).write('b').close()
-      get(l).should.equal 'a\n\n\nb'
-
-    it "margin top should work for: block, line", ->
-      l = new Layout
-      l.openBlock(conf top: 1).write('a').close()
-      l.write 'b'
-      get(l).should.equal '\na\nb'
-
-    it "margin top should work for: block, line, when block starts with a break", ->
-      l = new Layout
-      l.openBlock(conf top: 1).write('\na').close()
-      l.write 'b'
-      get(l).should.equal '\n\na\nb'
-
-    it "margin top should work for: line, block, when line ends with a break", ->
-      l = new Layout
-      l.write 'a\n'
-      l.openBlock(conf top: 1).write('b').close()
-      get(l).should.equal 'a\n\n\nb'
-
-    it "margin top should work for: line, block, when there are two breaks in between", ->
-      l = new Layout
-      l.write 'a\n'
-      l.openBlock(conf top: 1).write('\nb').close()
-      get(l).should.equal 'a\n\n\n\nb'
-
-    it "margin bottom should work for: line, block", ->
-      l = new Layout
-      l.write 'a'
-      l.openBlock(conf bottom: 1).write('b').close()
-      get(l).should.equal 'a\nb\n'
-
-    it "margin bottom should work for: block, line", ->
-      l = new Layout
-      l.openBlock(conf bottom: 1).write('a').close()
-      l.write 'b'
-      get(l).should.equal 'a\n\nb'
-
-    it "margin bottom should work for: block, line, when block ends with a break", ->
-      l = new Layout
-      l.openBlock(conf bottom: 1).write('a\n').close()
-      l.write 'b'
-      get(l).should.equal 'a\n\n\nb'
-
-    it "margin bottom should work for: block, line, when line starts with a break", ->
-      l = new Layout
-      l.openBlock(conf bottom: 1).write('a').close()
-      l.write '\nb'
-      get(l).should.equal 'a\n\n\nb'
-
-    it "margin bottom should work for: block, line, when there are two breaks in between", ->
-      l = new Layout
-      l.openBlock(conf bottom: 1).write('a\n').close()
-      l.write '\nb'
-      get(l).should.equal 'a\n\n\n\nb'
-
-  describe "blocks and blocks", ->
-    it "should not get extra break lines for full-width lines", ->
-      l = new Layout
-      l.openBlock(conf width: 20).write('01234567890123456789').close()
-      l.openBlock().write('b').close()
-      get(l).should.equal '01234567890123456789\nb'
-
-    it "should not get extra break lines for full-width lines followed by a margin", ->
-      l = new Layout
-      l.openBlock(conf width: 20, bottom: 1).write('01234567890123456789').close()
-      l.openBlock().write('b').close()
-      get(l).should.equal '01234567890123456789\n\nb'
-
-    it "a(top: 0, bottom: 0) b(top: 0, bottom: 0)", ->
-      l = new Layout
-      l.openBlock().write('a').close()
-      l.openBlock().write('b').close()
-      get(l).should.equal 'a\nb'
-
-    it "a(top: 0, bottom: 0) b(top: 1, bottom: 0)", ->
-      l = new Layout
-      l.openBlock().write('a').close()
-      l.openBlock(conf(top: 1)).write('b').close()
-      get(l).should.equal 'a\n\nb'
-
-    it "a(top: 0, bottom: 1) b(top: 0, bottom: 0)", ->
-      l = new Layout
-      l.openBlock(conf(bottom: 1)).write('a').close()
-      l.openBlock().write('b').close()
-      get(l).should.equal 'a\n\nb'
-
-    it "a(top: 0, bottom: 1   ) b(   top: 1, bottom: 0)", ->
-      l = new Layout
-      l.openBlock(conf(bottom: 1)).write('a').close()
-      l.openBlock(conf(top: 1)).write('b').close()
-      get(l).should.equal 'a\n\n\nb'
-
-    it "a(top: 0, bottom: 1 br) b(br top: 1, bottom: 0)", ->
-      l = new Layout
-      l.openBlock(conf(bottom: 1)).write('a\n').close()
-      l.openBlock(conf(top: 1)).write('\nb').close()
-      get(l).should.equal 'a\n\n\n\n\nb'
-
-    it "a(top: 2, bottom: 3 a1-br-a2) b(br-b1-br-br-b2-br top: 2, bottom: 3)", ->
-      l = new Layout
-      l.openBlock(conf(top: 2, bottom: 3)).write('a1\na2').close()
-      l.openBlock(conf(top: 2, bottom: 3)).write('\nb1\n\nb2\n').close()
-      get(l).should.equal '\n\na1\na2\n\n\n\n\n\n\nb1\n\nb2\n\n\n\n'
-
-  describe "nesting", ->
-    it "should break one line for nested blocks", ->
-      l = new Layout
-      l.write 'a'
-      b = l.openBlock()
-      c = b.openBlock().write('c').close()
-      b.close()
-      get(l).should.equal 'a\nc'
-
-    it "a(left: 2) > b(top: 2)", ->
-      l = new Layout
-      a = l.openBlock(conf(left: 2))
-      a.openBlock(conf(top: 2)).write('b').close()
-      a.close()
-      get(l).should.equal '  \n  \n  b'
-
-    it "a(left: 2) > b(bottom: 2)", ->
-      l = new Layout
-      a = l.openBlock(conf(left: 2))
-      a.openBlock(conf(bottom: 2)).write('b').close()
-      a.close()
-      get(l).should.equal '  b\n  \n  '
-
-  describe "bullets", ->
-    it "basic bullet", ->
-      l = new Layout
-      l.openBlock(conf(left: 3, bullet: yes)).write('a').close()
-      get(l).should.equal '-  a'
-
-    it "a(left: 3, bullet) > b(top:1)", ->
-      l = new Layout
-      a = l.openBlock(conf(left: 3, bullet: yes))
-      b = a.openBlock(conf(top: 1)).write('b').close()
-      a.close()
-      get(l).should.equal '-  \n   b'
\ No newline at end of file