taler/exchange
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
e96cf9ba66
exchange/src/auditor/test-auditor.sh
Christian Grothoff e96cf9ba66
-fix auditor tests (mostly)
2022-08-23 20:40:26 +02:00

2158 lines
79 KiB
Bash
Executable File
Raw Blame History

#!/bin/bash
# Setup database which was generated from a perfectly normal
# exchange-wallet interaction and run the auditor against it.
#
# Check that the auditor report is as expected.
#
# Requires 'jq' tool and Postgres superuser rights!
set -eu
#set -x
# Set of numbers for all the testcases.
# When adding new tests, increase the last number:
ALL_TESTS=`seq 0 33`
# $TESTS determines which tests we should run.
# This construction is used to make it easy to
# only run a subset of the tests. To only run a subset,
# pass the numbers of the tests to run as the FIRST
# argument to test-auditor.sh, i.e.:
#
# $ test-auditor.sh "1 3"
#
# to run tests 1 and 3 only. By default, all tests are run.
#
TESTS=${1:-$ALL_TESTS}
# Global variable to run the auditor processes under valgrind
# VALGRIND=valgrind
VALGRIND=""
# Number of seconds to let libeuifn background
# tasks apply a cycle of payment submission and
# history request.
LIBEUFIN_SETTLE_TIME=1
# Exit, with status code "skip" (no 'real' failure)
function exit_skip() {
echo $1
exit 77
}
# Exit, with error message (hard failure)
function exit_fail() {
echo $1
exit 1
}
# Cleanup to run whenever we exit
function cleanup()
{
for n in `jobs -p`
do
kill $n 2> /dev/null || true
done
wait
# kill euFin
echo -n "Killing euFin.."
kill `cat libeufin-sandbox.pid 2> /dev/null` &> /dev/null || true
kill `cat libeufin-nexus.pid 2> /dev/null` &> /dev/null || true
echo DONE
}
# Install cleanup handler (except for kill -9)
trap cleanup EXIT
function launch_libeufin () {
export LIBEUFIN_NEXUS_DB_CONNECTION="jdbc:sqlite:$DB.sqlite3"
libeufin-nexus serve --port 8082 \
2> libeufin-nexus-stderr.log \
> libeufin-nexus-stdout.log &
echo $! > libeufin-nexus.pid
export LIBEUFIN_SANDBOX_DB_CONNECTION="jdbc:sqlite:$DB.sqlite3"
export LIBEUFIN_SANDBOX_ADMIN_PASSWORD=secret
libeufin-sandbox serve --port 18082 \
> libeufin-sandbox-stdout.log \
2> libeufin-sandbox-stderr.log &
echo $! > libeufin-sandbox.pid
}
# Downloads new transactions from the bank.
function nexus_fetch_transactions () {
export LIBEUFIN_NEXUS_USERNAME=exchange
export LIBEUFIN_NEXUS_PASSWORD=x
export LIBEUFIN_NEXUS_URL=http://localhost:8082/
libeufin-cli accounts fetch-transactions \
--range-type since-last --level report exchange-nexus > /dev/null
unset LIBEUFIN_NEXUS_USERNAME
unset LIBEUFIN_NEXUS_PASSWORD
unset LIBEUFIN_NEXUS_URL
}
# Instruct Nexus to all the prepared payments (= those
# POSTed to /transfer by the exchange).
function nexus_submit_to_sandbox () {
export LIBEUFIN_NEXUS_USERNAME=exchange
export LIBEUFIN_NEXUS_PASSWORD=x
export LIBEUFIN_NEXUS_URL=http://localhost:8082/
libeufin-cli accounts submit-payments exchange-nexus
unset LIBEUFIN_NEXUS_USERNAME
unset LIBEUFIN_NEXUS_PASSWORD
unset LIBEUFIN_NEXUS_URL
}
# Operations to run before the actual audit
function pre_audit () {
# Launch bank
echo -n "Launching bank"
EXCHANGE_URL=`taler-config -c $CONF -s EXCHANGE -o BASE_URL`
launch_libeufin
for n in `seq 1 80`
do
echo -n "."
sleep 0.1
OK=1
wget http://localhost:18082/ -o /dev/null -O /dev/null >/dev/null && break
OK=0
done
if [ 1 != $OK ]
then
exit_skip "Failed to launch Sandbox"
fi
sleep $LIBEUFIN_SETTLE_TIME
for n in `seq 1 80`
do
echo -n "."
sleep 0.1
OK=1
wget http://localhost:8082/ -o /dev/null -O /dev/null >/dev/null && break
OK=0
done
if [ 1 != $OK ]
then
exit_skip "Failed to launch Nexus"
fi
echo " DONE"
if test ${1:-no} = "aggregator"
then
echo -n "Running exchange aggregator ..."
taler-exchange-aggregator -y -L INFO -t -c $CONF 2> aggregator.log || exit_fail "FAIL"
echo " DONE"
echo -n "Running exchange closer ..."
taler-exchange-closer -L INFO -t -c $CONF 2> closer.log || exit_fail "FAIL"
echo " DONE"
echo -n "Running exchange transfer ..."
taler-exchange-transfer -L INFO -t -c $CONF 2> transfer.log || exit_fail "FAIL"
echo " DONE"
echo -n "Running Nexus payment submitter ..."
nexus_submit_to_sandbox
echo " DONE"
# Make outgoing transactions appear in the TWG:
echo -n "Download bank transactions ..."
nexus_fetch_transactions
echo " DONE"
fi
}
# actual audit run
function audit_only () {
# Run the auditor!
echo -n "Running audit(s) ..."
# Restart so that first run is always fresh, and second one is incremental
taler-auditor-dbinit -r -c $CONF
$VALGRIND taler-helper-auditor-aggregation -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-aggregation.json 2> test-audit-aggregation.log || exit_fail "aggregation audit failed"
echo -n "."
$VALGRIND taler-helper-auditor-aggregation -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-aggregation-inc.json 2> test-audit-aggregation-inc.log || exit_fail "incremental aggregation audit failed"
echo -n "."
$VALGRIND taler-helper-auditor-coins -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-coins.json 2> test-audit-coins.log || exit_fail "coin audit failed"
echo -n "."
$VALGRIND taler-helper-auditor-coins -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-coins-inc.json 2> test-audit-coins-inc.log || exit_fail "incremental coin audit failed"
echo -n "."
$VALGRIND taler-helper-auditor-deposits -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-deposits.json 2> test-audit-deposits.log || exit_fail "deposits audit failed"
echo -n "."
$VALGRIND taler-helper-auditor-deposits -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-deposits-inc.json 2> test-audit-deposits-inc.log || exit_fail "incremental deposits audit failed"
echo -n "."
$VALGRIND taler-helper-auditor-reserves -i -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-reserves.json 2> test-audit-reserves.log || exit_fail "reserves audit failed"
echo -n "."
$VALGRIND taler-helper-auditor-reserves -i -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-reserves-inc.json 2> test-audit-reserves-inc.log || exit_fail "incremental reserves audit failed"
echo -n "."
$VALGRIND taler-helper-auditor-wire -i -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-wire.json 2> test-wire-audit.log || exit_fail "wire audit failed"
echo -n "."
$VALGRIND taler-helper-auditor-wire -i -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-wire-inc.json 2> test-wire-audit-inc.log || exit_fail "wire audit inc failed"
echo -n "."
echo " DONE"
}
# Cleanup to run after the auditor
function post_audit () {
taler-exchange-dbinit -c $CONF -g || exit_fail "exchange DB GC failed"
cleanup
echo -n "TeXing ."
taler-helper-auditor-render.py test-audit-aggregation.json test-audit-coins.json test-audit-deposits.json test-audit-reserves.json test-audit-wire.json < ../../contrib/auditor-report.tex.j2 > test-report.tex || exit_fail "Renderer failed"
echo -n "."
timeout 10 pdflatex test-report.tex >/dev/null || exit_fail "pdflatex failed"
echo -n "."
timeout 10 pdflatex test-report.tex >/dev/null
echo " DONE"
}
# Run audit process on current database, including report
# generation. Pass "aggregator" as $1 to run
# $ taler-exchange-aggregator
# before auditor (to trigger pending wire transfers).
# Pass "drain" as $2 to run a drain operation as well.
function run_audit () {
pre_audit ${1:-no}
if test ${2:-no} = "drain"
then
echo -n "Starting exchange..."
taler-exchange-httpd -c "${CONF}" -L INFO 2> exchange-httpd-drain.err &
EPID=$!
# Wait for all services to be available
for n in `seq 1 50`
do
echo -n "."
sleep 0.1
OK=0
# exchange
wget http://localhost:8081/seed -o /dev/null -O /dev/null >/dev/null || continue
OK=1
break
done
echo "... DONE."
export CONF
MASTER_PRIV_FILE=`taler-config -f -c ${CONF} -s exchange-offline -o MASTER_PRIV_FILE`
MASTER_PUB=`gnunet-ecc -p $MASTER_PRIV_FILE`
echo "MASTER PUB is ${MASTER_PUB} using file ${MASTER_PRIV_FILE}"
echo -n "Running taler-exchange-offline drain "
taler-exchange-offline -L DEBUG -c "${CONF}" \
drain TESTKUDOS:0.1 exchange-account-1 payto://iban/SANDBOXX/DE360679?receiver-name=Exchange+Drain \
upload \
2> taler-exchange-offline-drain.log || exit_fail "offline draining failed"
kill -TERM $EPID
wait $EPID
echo -n "Running taler-exchange-drain ..."
echo "\n" | taler-exchange-drain -L DEBUG -c $CONF 2> taler-exchange-drain.log || exit_fail "FAIL"
echo " DONE"
echo -n "Running taler-exchange-transfer ..."
taler-exchange-transfer -L INFO -t -c $CONF 2> drain-transfer.log || exit_fail "FAIL"
echo " DONE"
export LIBEUFIN_NEXUS_USERNAME=exchange
export LIBEUFIN_NEXUS_PASSWORD=x
export LIBEUFIN_NEXUS_URL=http://localhost:8082/
PAIN_UUID=`libeufin-cli accounts list-payments exchange-nexus | jq .initiatedPayments[] | jq 'select(.submitted==false)' | jq -r .paymentInitiationId`
libeufin-cli accounts submit-payments --payment-uuid ${PAIN_UUID} exchange-nexus
fi
audit_only
post_audit
}
# Do a full reload of the (original) database
full_reload()
{
echo "Doing full reload of the database ($BASEDB)... "
dropdb $DB 2> /dev/null || true
rm -f $DB.sqlite3 2> /dev/null || true # libeufin
createdb -T template0 $DB || exit_skip "could not create database"
# Import pre-generated database, -q(ietly) using single (-1) transaction
psql -Aqt $DB -q -1 -f ${BASEDB}.sql > /dev/null || exit_skip "Failed to load database"
echo "Loading libeufin basedb: ${BASEDB}-libeufin.sql"
sqlite3 $DB.sqlite3 < ${BASEDB}-libeufin.sql || exit_skip "Failed to load libEufin database"
echo "DONE"
}
function test_0() {
echo "===========0: normal run with aggregator==========="
run_audit aggregator
echo "Checking output"
# if an emergency was detected, that is a bug and we should fail
echo -n "Test for emergencies... "
jq -e .emergencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo PASS
echo -n "Test for deposit confirmation emergencies... "
jq -e .deposit_confirmation_inconsistencies[0] < test-audit-deposits.json > /dev/null && exit_fail "Unexpected deposit confirmation inconsistency detected" || echo PASS
echo -n "Test for emergencies by count... "
jq -e .emergencies_by_count[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo PASS
echo -n "Test for wire inconsistencies... "
jq -e .wire_out_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run"
jq -e .reserve_in_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run"
jq -e .missattribution_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run"
jq -e .row_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run"
jq -e .denomination_key_validity_withdraw_inconsistencies[0] < test-audit-reserves.json > /dev/null && exit_fail "Unexpected denomination key withdraw inconsistency detected in ordinary run"
jq -e .row_minor_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run"
jq -e .lag_details[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected lag detected in ordinary run"
jq -e .wire_format_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run"
# TODO: check operation balances are correct (once we have all transaction types and wallet is deterministic)
# TODO: check revenue summaries are correct (once we have all transaction types and wallet is deterministic)
echo PASS
LOSS=`jq -r .total_bad_sig_loss < test-audit-aggregation.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong total bad sig loss from aggregation, got unexpected loss of $LOSS"
fi
LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong total bad sig loss from coins, got unexpected loss of $LOSS"
fi
LOSS=`jq -r .total_bad_sig_loss < test-audit-reserves.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong total bad sig loss from reserves, got unexpected loss of $LOSS"
fi
echo -n "Test for wire amounts... "
WIRED=`jq -r .total_wire_in_delta_plus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta plus wrong, got $WIRED"
fi
WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta minus wrong, got $WIRED"
fi
WIRED=`jq -r .total_wire_out_delta_plus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta plus wrong, got $WIRED"
fi
WIRED=`jq -r .total_wire_out_delta_minus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta minus wrong, got $WIRED"
fi
WIRED=`jq -r .total_missattribution_in < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total missattribution in wrong, got $WIRED"
fi
echo PASS
echo -n "Checking for unexpected arithmetic differences "
LOSS=`jq -r .total_arithmetic_delta_plus < test-audit-aggregation.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from aggregations, got unexpected plus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_minus < test-audit-aggregation.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from aggregation, got unexpected minus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_plus < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from coins, got unexpected plus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_minus < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from coins, got unexpected minus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_plus < test-audit-reserves.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from reserves, got unexpected plus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_minus < test-audit-reserves.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from reserves, got unexpected minus of $LOSS"
fi
jq -e .amount_arithmetic_inconsistencies[0] < test-audit-aggregation.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from aggregations detected in ordinary run"
jq -e .amount_arithmetic_inconsistencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from coins detected in ordinary run"
jq -e .amount_arithmetic_inconsistencies[0] < test-audit-reserves.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from reserves detected in ordinary run"
echo PASS
echo -n "Checking for unexpected wire out differences "
jq -e .wire_out_inconsistencies[0] < test-audit-aggregation.json > /dev/null && exit_fail "Unexpected wire out inconsistencies detected in ordinary run"
echo PASS
# cannot easily undo aggregator, hence full reload
full_reload
}
# Run without aggregator, hence auditor should detect wire
# transfer lag!
function test_1() {
echo "===========1: normal run==========="
run_audit
echo "Checking output"
# if an emergency was detected, that is a bug and we should fail
echo -n "Test for emergencies... "
jq -e .emergencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo PASS
echo -n "Test for emergencies by count... "
jq -e .emergencies_by_count[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo PASS
echo -n "Test for wire inconsistencies... "
jq -e .wire_out_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run"
jq -e .reserve_in_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run"
jq -e .missattribution_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run"
jq -e .row_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run"
jq -e .row_minor_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run"
jq -e .wire_format_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run"
# TODO: check operation balances are correct (once we have all transaction types and wallet is deterministic)
# TODO: check revenue summaries are correct (once we have all transaction types and wallet is deterministic)
echo PASS
echo -n "Check for lag detection... "
# Check wire transfer lag reported (no aggregator!)
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
jq -e .lag_details[0] < test-audit-wire.json > /dev/null || exit_fail "Lag not detected in run without aggregator at age $DELTA"
LAG=`jq -r .total_amount_lag < test-audit-wire.json`
if test $LAG = "TESTKUDOS:0"
then
exit_fail "Expected total lag to be non-zero"
fi
echo "PASS"
else
echo "SKIP (database too new)"
fi
echo -n "Test for wire amounts... "
WIRED=`jq -r .total_wire_in_delta_plus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta plus wrong, got $WIRED"
fi
WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta minus wrong, got $WIRED"
fi
WIRED=`jq -r .total_wire_out_delta_plus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta plus wrong, got $WIRED"
fi
WIRED=`jq -r .total_wire_out_delta_minus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta minus wrong, got $WIRED"
fi
WIRED=`jq -r .total_missattribution_in < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total missattribution in wrong, got $WIRED"
fi
# Database was unmodified, no need to undo
echo "OK"
}
# Change amount of wire transfer reported by exchange
function test_2() {
echo "===========2: reserves_in inconsistency ==========="
echo "UPDATE exchange.reserves_in SET credit_val=5 WHERE reserve_in_serial_id=1" | psql -At $DB
run_audit
echo -n "Testing inconsistency detection... "
ROW=`jq .reserve_in_amount_inconsistencies[0].row < test-audit-wire.json`
if test $ROW != 1
then
exit_fail "Row $ROW is wrong"
fi
WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_wired < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:10"
then
exit_fail "Amount wrong"
fi
EXPECTED=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-audit-wire.json`
if test $EXPECTED != "TESTKUDOS:5"
then
exit_fail "Expected amount wrong"
fi
WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Wrong total wire_in_delta_minus, got $WIRED"
fi
DELTA=`jq -r .total_wire_in_delta_plus < test-audit-wire.json`
if test $DELTA != "TESTKUDOS:5"
then
exit_fail "Expected total wire delta plus wrong, got $DELTA"
fi
echo PASS
# Undo database modification
echo "UPDATE exchange.reserves_in SET credit_val=10 WHERE reserve_in_serial_id=1" | psql -Aqt $DB
}
# Check for incoming wire transfer amount given being
# lower than what exchange claims to have received.
function test_3() {
echo "===========3: reserves_in inconsistency==========="
echo "UPDATE exchange.reserves_in SET credit_val=15 WHERE reserve_in_serial_id=1" | psql -Aqt $DB
run_audit
EXPECTED=`jq -r .reserve_balance_summary_wrong_inconsistencies[0].auditor < test-audit-reserves.json`
if test $EXPECTED != "TESTKUDOS:5.01"
then
exit_fail "Expected reserve balance summary amount wrong, got $EXPECTED (auditor)"
fi
EXPECTED=`jq -r .reserve_balance_summary_wrong_inconsistencies[0].exchange < test-audit-reserves.json`
if test $EXPECTED != "TESTKUDOS:0.01"
then
exit_fail "Expected reserve balance summary amount wrong, got $EXPECTED (exchange)"
fi
WIRED=`jq -r .total_loss_balance_insufficient < test-audit-reserves.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Wrong total loss from insufficient balance, got $WIRED"
fi
ROW=`jq -e .reserve_in_amount_inconsistencies[0].row < test-audit-wire.json`
if test $ROW != 1
then
exit_fail "Row wrong, got $ROW"
fi
WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:15"
then
exit_fail "Wrong amount_exchange_expected, got $WIRED"
fi
WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_wired < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:10"
then
exit_fail "Wrong amount_wired, got $WIRED"
fi
WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:5"
then
exit_fail "Wrong total wire_in_delta_minus, got $WIRED"
fi
WIRED=`jq -r .total_wire_in_delta_plus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Wrong total wire_in_delta_plus, got $WIRED"
fi
# Undo database modification
echo "UPDATE exchange.reserves_in SET credit_val=10 WHERE reserve_in_serial_id=1" | psql -Aqt $DB
}
# Check for incoming wire transfer amount given being
# lower than what exchange claims to have received.
function test_4() {
echo "===========4: deposit wire target wrong================="
# Original target bank account was 43, changing to 44
SERIAL=`echo "SELECT deposit_serial_id FROM exchange.deposits WHERE amount_with_fee_val=3 AND amount_with_fee_frac=0 ORDER BY deposit_serial_id LIMIT 1" | psql $DB -Aqt`
OLD_WIRE_ID=`echo "SELECT wire_target_h_payto FROM exchange.deposits WHERE deposit_serial_id=${SERIAL};" | psql $DB -Aqt`
NEW_WIRE_ID=`echo "INSERT INTO exchange.wire_targets (payto_uri, wire_target_h_payto) VALUES ('payto://x-taler-bank/localhost/testuser-xxlargtp', '\x1e8f31936b3cee8f8afd3aac9e38b5db42d45b721ffc4eb1e5b9ddaf1565660b');" | psql $DB -Aqt`
echo "UPDATE exchange.deposits SET wire_target_h_payto='\x1e8f31936b3cee8f8afd3aac9e38b5db42d45b721ffc4eb1e5b9ddaf1565660b' WHERE deposit_serial_id=${SERIAL}" | psql -Aqt $DB
run_audit
echo -n "Testing inconsistency detection... "
jq -e .bad_sig_losses[0] < test-audit-coins.json > /dev/null || exit_fail "Bad signature not detected"
ROW=`jq -e .bad_sig_losses[0].row < test-audit-coins.json`
if test $ROW != ${SERIAL}
then
exit_fail "Row wrong, got $ROW"
fi
LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:3"
then
exit_fail "Wrong deposit bad signature loss, got $LOSS"
fi
OP=`jq -r .bad_sig_losses[0].operation < test-audit-coins.json`
if test $OP != "deposit"
then
exit_fail "Wrong operation, got $OP"
fi
LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:3"
then
exit_fail "Wrong total bad sig loss, got $LOSS"
fi
echo PASS
# Undo:
echo "UPDATE exchange.deposits SET wire_target_h_payto='$OLD_WIRE_ID' WHERE deposit_serial_id=${SERIAL}" | psql -Aqt $DB
}
# Test where h_contract_terms in the deposit table is wrong
# (=> bad signature)
function test_5() {
echo "===========5: deposit contract hash wrong================="
# Modify h_wire hash, so it is inconsistent with 'wire'
SERIAL=`echo "SELECT deposit_serial_id FROM exchange.deposits WHERE amount_with_fee_val=3 AND amount_with_fee_frac=0 ORDER BY deposit_serial_id LIMIT 1" | psql $DB -Aqt`
OLD_H=`echo "SELECT h_contract_terms FROM exchange.deposits WHERE deposit_serial_id=$SERIAL;" | psql $DB -Aqt`
echo "UPDATE exchange.deposits SET h_contract_terms='\x12bb676444955c98789f219148aa31899d8c354a63330624d3d143222cf3bb8b8e16f69accd5a8773127059b804c1955696bf551dd7be62719870613332aa8d5' WHERE deposit_serial_id=$SERIAL" | psql -Aqt $DB
run_audit
echo -n "Checking bad signature detection... "
ROW=`jq -e .bad_sig_losses[0].row < test-audit-coins.json`
if test $ROW != $SERIAL
then
exit_fail "Row wrong, got $ROW"
fi
LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:3"
then
exit_fail "Wrong deposit bad signature loss, got $LOSS"
fi
OP=`jq -r .bad_sig_losses[0].operation < test-audit-coins.json`
if test $OP != "deposit"
then
exit_fail "Wrong operation, got $OP"
fi
LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:3"
then
exit_fail "Wrong total bad sig loss, got $LOSS"
fi
echo PASS
# Undo:
echo "UPDATE exchange.deposits SET h_contract_terms='${OLD_H}' WHERE deposit_serial_id=$SERIAL" | psql -Aqt $DB
}
# Test where denom_sig in known_coins table is wrong
# (=> bad signature)
function test_6() {
echo "===========6: known_coins signature wrong================="
# Modify denom_sig, so it is wrong
OLD_SIG=`echo 'SELECT denom_sig FROM exchange.known_coins LIMIT 1;' | psql $DB -Aqt`
COIN_PUB=`echo "SELECT coin_pub FROM exchange.known_coins WHERE denom_sig='$OLD_SIG';" | psql $DB -Aqt`
echo "UPDATE exchange.known_coins SET denom_sig='\x0000000100000000287369672d76616c200a2028727361200a2020287320233542383731423743393036444643303442424430453039353246413642464132463537303139374131313437353746324632323332394644443146324643333445393939413336363430334233413133324444464239413833353833464536354442374335434445304441453035374438363336434541423834463843323843344446304144363030343430413038353435363039373833434431333239393736423642433437313041324632414132414435413833303432434346314139464635394244434346374436323238344143354544364131373739463430353032323241373838423837363535453434423145443831364244353638303232413123290a2020290a20290b' WHERE coin_pub='$COIN_PUB'" | psql -Aqt $DB
run_audit
ROW=`jq -e .bad_sig_losses[0].row < test-audit-coins.json`
if test $ROW != "1"
then
exit_fail "Row wrong, got $ROW"
fi
LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-coins.json`
if test $LOSS == "TESTKUDOS:0"
then
exit_fail "Wrong deposit bad signature loss, got $LOSS"
fi
OP=`jq -r .bad_sig_losses[0].operation < test-audit-coins.json`
if test $OP != "melt"
then
exit_fail "Wrong operation, got $OP"
fi
LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json`
if test $LOSS == "TESTKUDOS:0"
then
exit_fail "Wrong total bad sig loss, got $LOSS"
fi
# Undo
echo "UPDATE exchange.known_coins SET denom_sig='$OLD_SIG' WHERE coin_pub='$COIN_PUB'" | psql -Aqt $DB
}
# Test where h_wire in the deposit table is wrong
function test_7() {
echo "===========7: reserves_out signature wrong================="
# Modify reserve_sig, so it is bogus
HBE=`echo 'SELECT h_blind_ev FROM exchange.reserves_out LIMIT 1;' | psql $DB -Aqt`
OLD_SIG=`echo "SELECT reserve_sig FROM exchange.reserves_out WHERE h_blind_ev='$HBE';" | psql $DB -Aqt`
A_VAL=`echo "SELECT amount_with_fee_val FROM exchange.reserves_out WHERE h_blind_ev='$HBE';" | psql $DB -Aqt`
A_FRAC=`echo "SELECT amount_with_fee_frac FROM exchange.reserves_out WHERE h_blind_ev='$HBE';" | psql $DB -Aqt`
# Normalize, we only deal with cents in this test-case
A_FRAC=`expr $A_FRAC / 1000000 || true`
echo "UPDATE exchange.reserves_out SET reserve_sig='\x9ef381a84aff252646a157d88eded50f708b2c52b7120d5a232a5b628f9ced6d497e6652d986b581188fb014ca857fd5e765a8ccc4eb7e2ce9edcde39accaa4b' WHERE h_blind_ev='$HBE'" | psql -Aqt $DB
run_audit
OP=`jq -r .bad_sig_losses[0].operation < test-audit-reserves.json`
if test $OP != "withdraw"
then
exit_fail "Wrong operation, got $OP"
fi
LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-reserves.json`
LOSS_TOTAL=`jq -r .total_bad_sig_loss < test-audit-reserves.json`
if test $LOSS != $LOSS_TOTAL
then
exit_fail "Expected loss $LOSS and total loss $LOSS_TOTAL do not match"
fi
if test $A_FRAC != 0
then
if [ $A_FRAC -lt 10 ]
then
A_PREV="0"
else
A_PREV=""
fi
if test $LOSS != "TESTKUDOS:$A_VAL.$A_PREV$A_FRAC"
then
exit_fail "Expected loss TESTKUDOS:$A_VAL.$A_PREV$A_FRAC but got $LOSS"
fi
else
if test $LOSS != "TESTKUDOS:$A_VAL"
then
exit_fail "Expected loss TESTKUDOS:$A_VAL but got $LOSS"
fi
fi
# Undo:
echo "UPDATE exchange.reserves_out SET reserve_sig='$OLD_SIG' WHERE h_blind_ev='$HBE'" | psql -Aqt $DB
}
# Test wire transfer subject disagreement!
function test_8() {
echo "===========8: wire-transfer-subject disagreement==========="
OLD_ID=`echo "SELECT id FROM NexusBankTransactions WHERE amount='10' AND currency='TESTKUDOS' ORDER BY id LIMIT 1;" | sqlite3 $DB.sqlite3`
OLD_WTID=`echo "SELECT reservePublicKey FROM TalerIncomingPayments WHERE payment='$OLD_ID';" | sqlite3 $DB.sqlite3`
NEW_WTID="CK9QBFY972KR32FVA1MW958JWACEB6XCMHHKVFMCH1A780Q12SVG"
echo "UPDATE TalerIncomingPayments SET reservePublicKey='$NEW_WTID' WHERE payment='$OLD_ID';" | sqlite3 $DB.sqlite3
run_audit
echo -n "Testing inconsistency detection... "
DIAG=`jq -r .reserve_in_amount_inconsistencies[0].diagnostic < test-audit-wire.json`
if test "x$DIAG" != "xwire subject does not match"
then
exit_fail "Diagnostic wrong: $DIAG (0)"
fi
WTID=`jq -r .reserve_in_amount_inconsistencies[0].reserve_pub < test-audit-wire.json`
if test x$WTID != x"$OLD_WTID" -a x$WTID != x"$NEW_WTID"
then
exit_fail "WTID reported wrong: $WTID"
fi
EX_A=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-audit-wire.json`
if test x$WTID = x$OLD_WTID -a x$EX_A != x"TESTKUDOS:10"
then
exit_fail "Amount reported wrong: $EX_A"
fi
if test x$WTID = x$NEW_WTID -a x$EX_A != x"TESTKUDOS:0"
then
exit_fail "Amount reported wrong: $EX_A"
fi
DIAG=`jq -r .reserve_in_amount_inconsistencies[1].diagnostic < test-audit-wire.json`
if test "x$DIAG" != "xwire subject does not match"
then
exit_fail "Diagnostic wrong: $DIAG (1)"
fi
WTID=`jq -r .reserve_in_amount_inconsistencies[1].reserve_pub < test-audit-wire.json`
if test $WTID != "$OLD_WTID" -a $WTID != "$NEW_WTID"
then
exit_fail "WTID reported wrong: $WTID (wanted: $NEW_WTID or $OLD_WTID)"
fi
EX_A=`jq -r .reserve_in_amount_inconsistencies[1].amount_exchange_expected < test-audit-wire.json`
if test $WTID = "$OLD_WTID" -a $EX_A != "TESTKUDOS:10"
then
exit_fail "Amount reported wrong: $EX_A"
fi
if test $WTID = "$NEW_WTID" -a $EX_A != "TESTKUDOS:0"
then
exit_fail "Amount reported wrong: $EX_A"
fi
WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:10"
then
exit_fail "Wrong total wire_in_delta_minus, got $WIRED"
fi
DELTA=`jq -r .total_wire_in_delta_plus < test-audit-wire.json`
if test $DELTA != "TESTKUDOS:10"
then
exit_fail "Expected total wire delta plus wrong, got $DELTA"
fi
echo PASS
# Undo database modification
echo "UPDATE TalerIncomingPayments SET reservePublicKey='$OLD_WTID' WHERE payment='$OLD_ID';" | sqlite3 $DB.sqlite3
}
# Test wire origin disagreement!
function test_9() {
echo "===========9: wire-origin disagreement==========="
OLD_ID=`echo "SELECT id FROM NexusBankTransactions WHERE amount='10' AND currency='TESTKUDOS' ORDER BY id LIMIT 1;" | sqlite3 $DB.sqlite3`
OLD_ACC=`echo "SELECT incomingPaytoUri FROM TalerIncomingPayments WHERE payment='$OLD_ID';" | sqlite3 $DB.sqlite3`
echo "UPDATE TalerIncomingPayments SET incomingPaytoUri='payto://iban/SANDBOXX/DE144373?receiver-name=New+Exchange+Company' WHERE payment='$OLD_ID';" | sqlite3 $DB.sqlite3
run_audit
echo -n "Testing inconsistency detection... "
AMOUNT=`jq -r .missattribution_in_inconsistencies[0].amount < test-audit-wire.json`
if test "x$AMOUNT" != "xTESTKUDOS:10"
then
exit_fail "Reported amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .total_missattribution_in < test-audit-wire.json`
if test "x$AMOUNT" != "xTESTKUDOS:10"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
echo PASS
# Undo database modification
echo "UPDATE TalerIncomingPayments SET incomingPaytoUri='$OLD_ACC' WHERE payment='$OLD_ID';" | sqlite3 $DB.sqlite3
}
# Test wire_in timestamp disagreement!
function test_10() {
NOW_MS=`date +%s`000
echo "===========10: wire-timestamp disagreement==========="
OLD_ID=`echo "SELECT id FROM NexusBankTransactions WHERE amount='10' AND currency='TESTKUDOS' ORDER BY id LIMIT 1;" | sqlite3 $DB.sqlite3`
OLD_DATE=`echo "SELECT timestampMs FROM TalerIncomingPayments WHERE payment='$OLD_ID';" | sqlite3 $DB.sqlite3`
echo "UPDATE TalerIncomingPayments SET timestampMs=$NOW_MS WHERE payment=$OLD_ID;" | sqlite3 $DB.sqlite3
run_audit
echo -n "Testing inconsistency detection... "
DIAG=`jq -r .row_minor_inconsistencies[0].diagnostic < test-audit-wire.json`
if test "x$DIAG" != "xexecution date mismatch"
then
exit_fail "Reported diagnostic wrong: $DIAG"
fi
TABLE=`jq -r .row_minor_inconsistencies[0].table < test-audit-wire.json`
if test "x$TABLE" != "xreserves_in"
then
exit_fail "Reported table wrong: $TABLE"
fi
echo PASS
# Undo database modification
echo "UPDATE TalerIncomingPayments SET timestampMs='$OLD_DATE' WHERE payment=$OLD_ID;" | sqlite3 $DB.sqlite3
}
# Test for extra outgoing wire transfer.
# In case of changing the subject in the Nexus
# ingested table: '.batches[0].batchTransactions[0].details.unstructuredRemittanceInformation'
function test_11() {
echo "===========11: spurious outgoing transfer ==========="
OLD_ID=`echo "SELECT id FROM NexusBankTransactions WHERE amount='10' AND currency='TESTKUDOS' ORDER BY id LIMIT 1;" | sqlite3 $DB.sqlite3`
OLD_TX=`echo "SELECT transactionJson FROM NexusBankTransactions WHERE id='$OLD_ID';" | sqlite3 $DB.sqlite3`
# Change wire transfer to be FROM the exchange (#2) to elsewhere!
# (Note: this change also causes a missing incoming wire transfer, but
# this test is only concerned about the outgoing wire transfer
# being detected as such, and we simply ignore the other
# errors being reported.)
OTHER_IBAN=`echo -e "SELECT iban FROM BankAccounts WHERE label='fortytwo'" | sqlite3 $DB.sqlite3`
NEW_TX=$(echo "$OLD_TX" | jq .batches[0].batchTransactions[0].details.creditDebitIndicator='"DBIT"' | jq 'del(.batches[0].batchTransactions[0].details.debtor)' | jq 'del(.batches[0].batchTransactions[0].details.debtorAccount)' | jq 'del(.batches[0].batchTransactions[0].details.debtorAgent)' | jq '.batches[0].batchTransactions[0].details.creditor'='{"name": "Forty Two"}' | jq .batches[0].batchTransactions[0].details.creditorAccount='{"iban": "'$OTHER_IBAN'"}' | jq .batches[0].batchTransactions[0].details.creditorAgent='{"bic": "SANDBOXX"}' | jq .batches[0].batchTransactions[0].details.unstructuredRemittanceInformation='"CK9QBFY972KR32FVA1MW958JWACEB6XCMHHKVFMCH1A780Q12SVG http://exchange.example.com/"')
echo -e "UPDATE NexusBankTransactions SET transactionJson='"$NEW_TX"' WHERE id=$OLD_ID" | sqlite3 $DB.sqlite3
# Now fake that the exchange prepared this payment (= it POSTed to /transfer)
# This step is necessary, because the TWG table that accounts for outgoing
# payments needs it. Worth noting here is the column 'rawConfirmation' that
# points to the transaction from the main Nexus ledger; without that column set,
# a prepared payment won't appear as actually outgoing.
echo -e "INSERT INTO PaymentInitiations (bankAccount,preparationDate,submissionDate,sum,currency,endToEndId,paymentInformationId,instructionId,subject,creditorIban,creditorBic,creditorName,submitted,messageId,rawConfirmation) VALUES (1,1,1,10,'TESTKUDOS','NOTGIVEN','unused','unused','CK9QBFY972KR32FVA1MW958JWACEB6XCMHHKVFMCH1A780Q12SVG http://exchange.example.com/','"$OTHER_IBAN"','SANDBOXX','Forty Two','unused',1,$OLD_ID)" | sqlite3 $DB.sqlite3
# Now populate the TWG table that accounts for outgoing payments, in
# order to let /history/outgoing return one result.
echo -e "INSERT INTO TalerRequestedPayments (facade,payment,requestUid,amount,exchangeBaseUrl,wtid,creditAccount) VALUES (1,1,'unused','TESTKUDOS:10','http://exchange.example.com/','CK9QBFY972KR32FVA1MW958JWACEB6XCMHHKVFMCH1A780Q12SVG','payto://iban/SANDBOXX/"$OTHER_IBAN"?receiver-name=Forty+Two')" | sqlite3 $DB.sqlite3
run_audit
echo -n "Testing inconsistency detection... "
AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-audit-wire.json`
if test "x$AMOUNT" != "xTESTKUDOS:10"
then
exit_fail "Reported wired amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-wire.json`
if test "x$AMOUNT" != "xTESTKUDOS:10"
then
exit_fail "Reported total plus amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-wire.json`
if test "x$AMOUNT" != "xTESTKUDOS:0"
then
exit_fail "Reported total minus amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-audit-wire.json`
if test "x$AMOUNT" != "xTESTKUDOS:0"
then
exit_fail "Reported justified amount wrong: $AMOUNT"
fi
DIAG=`jq -r .wire_out_amount_inconsistencies[0].diagnostic < test-audit-wire.json`
if test "x$DIAG" != "xjustification for wire transfer not found"
then
exit_fail "Reported diagnostic wrong: $DIAG"
fi
echo PASS
# Undo database modification
echo -e "UPDATE NexusBankTransactions SET transactionJson='"$OLD_TX"' WHERE id=$OLD_ID;" | sqlite3 $DB.sqlite3
# No other prepared payment should exist at this point,
# so OK to remove the number 1.
echo -e "DELETE FROM PaymentInitiations WHERE id=1" | sqlite3 $DB.sqlite3
echo -e "DELETE FROM TalerRequestedPayments WHERE id=1" | sqlite3 $DB.sqlite3
}
# Test for hanging/pending refresh.
function test_12() {
echo "===========12: incomplete refresh ==========="
OLD_ACC=`echo "DELETE FROM exchange.refresh_revealed_coins;" | psql $DB -Aqt`
run_audit
echo -n "Testing hung refresh detection... "
HANG=`jq -er .refresh_hanging[0].amount < test-audit-coins.json`
TOTAL_HANG=`jq -er .total_refresh_hanging < test-audit-coins.json`
if test x$HANG = TESTKUDOS:0
then
exit_fail "Hanging amount zero"
fi
if test x$TOTAL_HANG = TESTKUDOS:0
then
exit_fail "Total hanging amount zero"
fi
echo PASS
# cannot easily undo DELETE, hence full reload
full_reload
}
# Test for wrong signature on refresh.
function test_13() {
echo "===========13: wrong melt signature ==========="
# Modify denom_sig, so it is wrong
COIN_PUB=`echo "SELECT old_coin_pub FROM exchange.refresh_commitments LIMIT 1;" | psql $DB -Aqt`
OLD_SIG=`echo "SELECT old_coin_sig FROM exchange.refresh_commitments WHERE old_coin_pub='$COIN_PUB';" | psql $DB -Aqt`
NEW_SIG="\xba588af7c13c477dca1ac458f65cc484db8fba53b969b873f4353ecbd815e6b4c03f42c0cb63a2b609c2d726e612fd8e0c084906a41f409b6a23a08a83c89a02"
echo "UPDATE exchange.refresh_commitments SET old_coin_sig='$NEW_SIG' WHERE old_coin_pub='$COIN_PUB'" | psql -Aqt $DB
run_audit
echo -n "Testing inconsistency detection... "
OP=`jq -er .bad_sig_losses[0].operation < test-audit-coins.json`
if test x$OP != xmelt
then
exit_fail "Operation wrong, got $OP"
fi
LOSS=`jq -er .bad_sig_losses[0].loss < test-audit-coins.json`
TOTAL_LOSS=`jq -er .total_bad_sig_loss < test-audit-coins.json`
if test x$LOSS != x$TOTAL_LOSS
then
exit_fail "Loss inconsistent, got $LOSS and $TOTAL_LOSS"
fi
if test x$TOTAL_LOSS = TESTKUDOS:0
then
exit_fail "Loss zero"
fi
echo PASS
# cannot easily undo DELETE, hence full reload
full_reload
}
# Test for wire fee disagreement
function test_14() {
echo "===========14: wire-fee disagreement==========="
# Check wire transfer lag reported (no aggregator!)
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-wire-auditor.c)
if [ $DATABASE_AGE -gt 3600 ]
then
# Wire fees are only checked/generated once there are
# actual outgoing wire transfers, so we need to run the
# aggregator here.
pre_audit aggregator
echo "UPDATE exchange.wire_fee SET wire_fee_frac=100;" | psql -Aqt $DB
audit_only
post_audit
echo -n "Testing inconsistency detection... "
TABLE=`jq -r .row_inconsistencies[0].table < test-audit-aggregation.json`
if test "x$TABLE" != "xwire-fee"
then
exit_fail "Reported table wrong: $TABLE"
fi
DIAG=`jq -r .row_inconsistencies[0].diagnostic < test-audit-aggregation.json`
if test "x$DIAG" != "xwire fee signature invalid at given time"
then
exit_fail "Reported diagnostic wrong: $DIAG"
fi
echo PASS
# cannot easily undo aggregator, hence full reload
full_reload
else
echo "Test skipped (database too new)"
fi
}
# Test where salt in the deposit table is wrong
function test_15() {
echo "===========15: deposit wire salt wrong================="
# Modify wire_salt hash, so it is inconsistent
SALT=`echo "SELECT wire_salt FROM exchange.deposits WHERE deposit_serial_id=1;" | psql -Aqt $DB`
echo "UPDATE exchange.deposits SET wire_salt='\x1197cd7f7b0e13ab1905fedb36c536a2' WHERE deposit_serial_id=1;" | psql -Aqt $DB
run_audit
echo -n "Testing inconsistency detection... "
OP=`jq -r .bad_sig_losses[0].operation < test-audit-coins.json`
if test "x$OP" != "xdeposit"
then
exit_fail "Reported operation wrong: $OP"
fi
echo PASS
# Restore DB
echo "UPDATE exchange.deposits SET wire_salt='$SALT' WHERE deposit_serial_id=1;" | psql -Aqt $DB
}
# Test where wired amount (wire out) is wrong
function test_16() {
echo "===========16: incorrect wire_out amount================="
# Check wire transfer lag reported (no aggregator!)
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
# First, we need to run the aggregator so we even
# have a wire_out to modify.
pre_audit aggregator
# This function helps to retry when the database is locked by
# libEufin.
# Modify wire amount, such that it is inconsistent with 'aggregation'
# (Only one payment out exist, so the logic below should select the outgoing
# wire transfer):
function test_16_db () {
OLD_AMOUNT=`echo "SELECT amount FROM TalerRequestedPayments WHERE id='1';" | sqlite3 $DB.sqlite3`
NEW_AMOUNT="TESTKUDOS:50"
echo "UPDATE TalerRequestedPayments SET amount='${NEW_AMOUNT}' WHERE id='1';" | sqlite3 $DB.sqlite3
}
echo -n Trying to patch the SQLite database..
for try in `seq 1 10`; do
if test_16_db 2>&1 > /dev/null; then
break
fi
echo -n .
if test $try = 10; then
exit_fail "Could not modify the SQLite database"
fi
sleep 0.3
done
echo DONE
audit_only
echo -n "Testing inconsistency detection... "
AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-audit-wire.json`
if test "x$AMOUNT" != "x$OLD_AMOUNT"
then
exit_fail "Reported justified amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-audit-wire.json`
if test "x$AMOUNT" != "x$NEW_AMOUNT"
then
exit_fail "Reported wired amount wrong: $AMOUNT"
fi
TOTAL_AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-wire.json`
if test "x$TOTAL_AMOUNT" != "xTESTKUDOS:0"
then
exit_fail "Reported total wired amount minus wrong: $TOTAL_AMOUNT"
fi
TOTAL_AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-wire.json`
if test "x$TOTAL_AMOUNT" = "xTESTKUDOS:0"
then
exit_fail "Reported total wired amount plus wrong: $TOTAL_AMOUNT"
fi
echo PASS
echo "Second modification: wire nothing"
NEW_AMOUNT="TESTKUDOS:0"
echo "UPDATE TalerRequestedPayments SET amount='${NEW_AMOUNT}' WHERE id='1';" | sqlite3 $DB.sqlite3
audit_only
echo -n "Testing inconsistency detection... "
AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-audit-wire.json`
if test "x$AMOUNT" != "x$OLD_AMOUNT"
then
exit_fail "Reported justified amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-audit-wire.json`
if test "x$AMOUNT" != "x$NEW_AMOUNT"
then
exit_fail "Reported wired amount wrong: $AMOUNT"
fi
TOTAL_AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-wire.json`
if test "x$TOTAL_AMOUNT" != "x$OLD_AMOUNT"
then
exit_fail "Reported total wired amount minus wrong: $TOTAL_AMOUNT (wanted $OLD_AMOUNT)"
fi
TOTAL_AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-wire.json`
if test "x$TOTAL_AMOUNT" != "xTESTKUDOS:0"
then
exit_fail "Reported total wired amount plus wrong: $TOTAL_AMOUNT"
fi
echo PASS
post_audit
# cannot easily undo aggregator, hence full reload
full_reload
else
echo "Test skipped (database too new)"
fi
}
# Test where wire-out timestamp is wrong
function test_17() {
echo "===========17: incorrect wire_out timestamp================="
# Check wire transfer lag reported (no aggregator!)
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
# First, we need to run the aggregator so we even
# have a wire_out to modify.
pre_audit aggregator
# This function helps to retry when the database is locked
# already by libEufin.
# Modify wire amount, such that it is inconsistent with 'aggregation'
# (exchange paid only once, so the logic below should select the outgoing
# wire transfer).
function test_17_db () {
OLD_ID=1
OLD_PREP=`echo "SELECT payment FROM TalerRequestedPayments WHERE id='${OLD_ID}';" | sqlite3 $DB.sqlite3`
OLD_DATE=`echo "SELECT preparationDate FROM PaymentInitiations WHERE id='${OLD_ID}';" | sqlite3 $DB.sqlite3`
# Note: need - interval '1h' as "NOW()" may otherwise be exactly what is already in the DB
# (due to rounding, if this machine is fast...)
NOW_1HR=$(expr $(date +%s) - 3600)
echo "UPDATE PaymentInitiations SET preparationDate='$NOW_1HR' WHERE id='${OLD_PREP}';" | sqlite3 $DB.sqlite3
}
echo -n Trying to patch the SQLite database..
for try in `seq 1 10`; do
if test_17_db 2>&1 > /dev/null; then
break
fi
echo -n .
if test $try = 10; then
exit_fail "Could not modify the SQLite database"
fi
sleep 0.3
done
echo DONE
audit_only
post_audit
echo -n "Testing inconsistency detection... "
TABLE=`jq -r .row_minor_inconsistencies[0].table < test-audit-wire.json`
if test "x$TABLE" != "xwire_out"
then
exit_fail "Reported table wrong: $TABLE"
fi
DIAG=`jq -r .row_minor_inconsistencies[0].diagnostic < test-audit-wire.json`
DIAG=`echo "$DIAG" | awk '{print $1 " " $2 " " $3}'`
if test "x$DIAG" != "xexecution date mismatch"
then
exit_fail "Reported diagnostic wrong: $DIAG"
fi
echo PASS
# cannot easily undo aggregator, hence full reload
full_reload
else
echo "Test skipped (database too new)"
fi
}
# Test where we trigger an emergency.
function test_18() {
echo "===========18: emergency================="
echo "DELETE FROM exchange.reserves_out;" | psql -Aqt $DB
run_audit
echo -n "Testing emergency detection... "
jq -e .reserve_balance_summary_wrong_inconsistencies[0] < test-audit-reserves.json > /dev/null || exit_fail "Reserve balance inconsistency not detected"
jq -e .emergencies[0] < test-audit-coins.json > /dev/null || exit_fail "Emergency not detected"
jq -e .emergencies_by_count[0] < test-audit-coins.json > /dev/null || exit_fail "Emergency by count not detected"
jq -e .amount_arithmetic_inconsistencies[0] < test-audit-coins.json > /dev/null || exit_fail "Escrow balance calculation impossibility not detected"
echo PASS
echo -n "Testing loss calculation... "
AMOUNT=`jq -r .emergencies_loss < test-audit-coins.json`
if test "x$AMOUNT" == "xTESTKUDOS:0"
then
exit_fail "Reported amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .emergencies_loss_by_count < test-audit-coins.json`
if test "x$AMOUNT" == "xTESTKUDOS:0"
then
exit_fail "Reported amount wrong: $AMOUNT"
fi
echo PASS
# cannot easily undo broad DELETE operation, hence full reload
full_reload
}
# Test where reserve closure was done properly
function test_19() {
echo "===========19: reserve closure done properly ================="
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
OLD_TIME=`echo "SELECT execution_date FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql $DB -Aqt`
OLD_VAL=`echo "SELECT credit_val FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql $DB -Aqt`
RES_PUB=`echo "SELECT reserve_pub FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql $DB -Aqt`
OLD_EXP=`echo "SELECT expiration_date FROM exchange.reserves WHERE reserve_pub='${RES_PUB}';" | psql $DB -Aqt`
VAL_DELTA=1
NEW_TIME=`expr $OLD_TIME - 3024000000000 || true` # 5 weeks
NEW_EXP=`expr $OLD_EXP - 3024000000000 || true` # 5 weeks
NEW_CREDIT=`expr $OLD_VAL + $VAL_DELTA || true`
echo "UPDATE exchange.reserves_in SET execution_date='${NEW_TIME}',credit_val=${NEW_CREDIT} WHERE reserve_in_serial_id=1;" | psql -Aqt $DB
echo "UPDATE exchange.reserves SET current_balance_val=${VAL_DELTA}+current_balance_val,expiration_date='${NEW_EXP}' WHERE reserve_pub='${RES_PUB}';" | psql -Aqt $DB
# Need to run with the aggregator so the reserve closure happens
run_audit aggregator
echo -n "Testing reserve closure was done correctly... "
jq -e .reserve_not_closed_inconsistencies[0] < test-audit-reserves.json > /dev/null && exit_fail "Unexpected reserve not closed inconsistency detected"
echo "PASS"
echo -n "Testing no bogus transfers detected... "
jq -e .wire_out_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in run with reserve closure"
echo "PASS"
# cannot easily undo aggregator, hence full reload
full_reload
else
echo "Test skipped (database too new)"
fi
}
# Test where reserve closure was not done properly
function test_20() {
echo "===========20: reserve closure missing ================="
OLD_TIME=`echo "SELECT execution_date FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql $DB -Aqt`
OLD_VAL=`echo "SELECT credit_val FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql $DB -Aqt`
RES_PUB=`echo "SELECT reserve_pub FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql $DB -Aqt`
NEW_TIME=`expr $OLD_TIME - 3024000000000 || true` # 5 weeks
NEW_CREDIT=`expr $OLD_VAL + 100 || true`
echo "UPDATE exchange.reserves_in SET execution_date='${NEW_TIME}',credit_val=${NEW_CREDIT} WHERE reserve_in_serial_id=1;" | psql -Aqt $DB
echo "UPDATE exchange.reserves SET current_balance_val=100+current_balance_val WHERE reserve_pub='${RES_PUB}';" | psql -Aqt $DB
# This time, run without the aggregator so the reserve closure is skipped!
run_audit
echo -n "Testing reserve closure missing detected... "
jq -e .reserve_not_closed_inconsistencies[0] < test-audit-reserves.json > /dev/null || exit_fail "Reserve not closed inconsistency not detected"
echo "PASS"
AMOUNT=`jq -r .total_balance_reserve_not_closed < test-audit-reserves.json`
if test "x$AMOUNT" == "xTESTKUDOS:0"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
# Undo
echo "UPDATE exchange.reserves_in SET execution_date='${OLD_TIME}',credit_val=${OLD_VAL} WHERE reserve_in_serial_id=1;" | psql -Aqt $DB
echo "UPDATE exchange.reserves SET current_balance_val=current_balance_val-100 WHERE reserve_pub='${RES_PUB}';" | psql -Aqt $DB
}
# Test reserve closure reported but wire transfer missing detection
function test_21() {
echo "===========21: reserve closure missreported ================="
# Check wire transfer lag reported (no aggregator!)
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
OLD_TIME=`echo "SELECT execution_date FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql $DB -Aqt`
OLD_VAL=`echo "SELECT credit_val FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql $DB -Aqt`
RES_PUB=`echo "SELECT reserve_pub FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql $DB -Aqt`
OLD_EXP=`echo "SELECT expiration_date FROM exchange.reserves WHERE reserve_pub='${RES_PUB}';" | psql $DB -Aqt`
VAL_DELTA=1
NEW_TIME=`expr $OLD_TIME - 3024000000000 || true` # 5 weeks
NEW_EXP=`expr $OLD_EXP - 3024000000000 || true` # 5 weeks
NEW_CREDIT=`expr $OLD_VAL + $VAL_DELTA || true`
echo "UPDATE exchange.reserves_in SET execution_date='${NEW_TIME}',credit_val=${NEW_CREDIT} WHERE reserve_in_serial_id=1;" | psql -Aqt $DB
echo "UPDATE exchange.reserves SET current_balance_val=${VAL_DELTA}+current_balance_val,expiration_date='${NEW_EXP}' WHERE reserve_pub='${RES_PUB}';" | psql -Aqt $DB
# Need to first run the aggregator so the transfer is marked as done exists
pre_audit aggregator
# remove transaction from bank DB
# Currently emulating this (to be deleted):
echo "DELETE FROM TalerRequestedPayments WHERE amount='TESTKUDOS:${VAL_DELTA}'" | sqlite3 $DB.sqlite3
audit_only
post_audit
echo -n "Testing lack of reserve closure transaction detected... "
jq -e .reserve_lag_details[0] < test-audit-wire.json > /dev/null || exit_fail "Reserve closure lag not detected"
AMOUNT=`jq -r .reserve_lag_details[0].amount < test-audit-wire.json`
if test "x$AMOUNT" != "xTESTKUDOS:${VAL_DELTA}"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .total_closure_amount_lag < test-audit-wire.json`
if test "x$AMOUNT" != "xTESTKUDOS:${VAL_DELTA}"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
echo "PASS"
# cannot easily undo aggregator, hence full reload
full_reload
else
echo "Test skipped (database too new)"
fi
}
# Test use of withdraw-expired denomination key
function test_22() {
echo "===========22: denomination key expired ================="
S_DENOM=`echo 'SELECT denominations_serial FROM exchange.reserves_out LIMIT 1;' | psql $DB -Aqt`
OLD_START=`echo "SELECT valid_from FROM exchange.denominations WHERE denominations_serial='${S_DENOM}';" | psql $DB -Aqt`
OLD_WEXP=`echo "SELECT expire_withdraw FROM exchange.denominations WHERE denominations_serial='${S_DENOM}';" | psql $DB -Aqt`
# Basically expires 'immediately', so that the withdraw must have been 'invalid'
NEW_WEXP=$OLD_START
echo "UPDATE exchange.denominations SET expire_withdraw=${NEW_WEXP} WHERE denominations_serial='${S_DENOM}';" | psql -Aqt $DB
run_audit
echo -n "Testing inconsistency detection... "
jq -e .denomination_key_validity_withdraw_inconsistencies[0] < test-audit-reserves.json > /dev/null || exit_fail "Denomination key withdraw inconsistency for $S_DENOM not detected"
echo PASS
# Undo modification
echo "UPDATE exchange.denominations SET expire_withdraw=${OLD_WEXP} WHERE denominations_serial='${S_DENOM}';" | psql -Aqt $DB
}
# Test calculation of wire-out amounts
function test_23() {
echo "===========23: wire out calculations ================="
# Check wire transfer lag reported (no aggregator!)
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
# Need to first run the aggregator so the transfer is marked as done exists
pre_audit aggregator
OLD_AMOUNT=`echo "SELECT amount_frac FROM exchange.wire_out WHERE wireout_uuid=1;" | psql $DB -Aqt`
NEW_AMOUNT=`expr $OLD_AMOUNT - 1000000 || true`
echo "UPDATE exchange.wire_out SET amount_frac=${NEW_AMOUNT} WHERE wireout_uuid=1;" | psql -Aqt $DB
audit_only
post_audit
echo -n "Testing inconsistency detection... "
jq -e .wire_out_inconsistencies[0] < test-audit-aggregation.json > /dev/null || exit_fail "Wire out inconsistency not detected"
ROW=`jq .wire_out_inconsistencies[0].rowid < test-audit-aggregation.json`
if test $ROW != 1
then
exit_fail "Row wrong"
fi
AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-aggregation.json`
if test "x$AMOUNT" != "xTESTKUDOS:0"
then
exit_fail "Reported amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-aggregation.json`
if test "x$AMOUNT" != "xTESTKUDOS:0.01"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
echo PASS
echo "Second pass: changing how amount is wrong to other direction"
NEW_AMOUNT=`expr $OLD_AMOUNT + 1000000 || true`
echo "UPDATE exchange.wire_out SET amount_frac=${NEW_AMOUNT} WHERE wireout_uuid=1;" | psql -Aqt $DB
pre_audit
audit_only
post_audit
echo -n "Testing inconsistency detection... "
jq -e .wire_out_inconsistencies[0] < test-audit-aggregation.json > /dev/null || exit_fail "Wire out inconsistency not detected"
ROW=`jq .wire_out_inconsistencies[0].rowid < test-audit-aggregation.json`
if test $ROW != 1
then
exit_fail "Row wrong"
fi
AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-aggregation.json`
if test "x$AMOUNT" != "xTESTKUDOS:0"
then
exit_fail "Reported amount wrong: $AMOUNT"
fi
AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-aggregation.json`
if test "x$AMOUNT" != "xTESTKUDOS:0.01"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
echo PASS
# cannot easily undo aggregator, hence full reload
full_reload
else
echo "Test skipped (database too new)"
fi
}
# Test for missing deposits in exchange database.
function test_24() {
echo "===========24: deposits missing ==========="
# Modify denom_sig, so it is wrong
CNT=`echo "SELECT COUNT(*) FROM exchange.deposit_confirmations;" | psql -Aqt $DB`
if test x$CNT = x0
then
echo "Skipping deposits missing test: no deposit confirmations in database!"
else
echo "DELETE FROM exchange.deposits;" | psql -Aqt $DB
echo "DELETE FROM exchange.deposits WHERE deposit_serial_id=1;" | psql -Aqt $DB
run_audit
echo -n "Testing inconsistency detection... "
jq -e .deposit_confirmation_inconsistencies[0] < test-audit-deposits.json > /dev/null || exit_fail "Deposit confirmation inconsistency NOT detected"
AMOUNT=`jq -er .missing_deposit_confirmation_total < test-audit-deposits.json`
if test x$AMOUNT = xTESTKUDOS:0
then
exit_fail "Expected non-zero total missing deposit confirmation amount"
fi
COUNT=`jq -er .missing_deposit_confirmation_count < test-audit-deposits.json`
if test x$AMOUNT = x0
then
exit_fail "Expected non-zero total missing deposit confirmation count"
fi
echo PASS
# cannot easily undo DELETE, hence full reload
full_reload
fi
}
# Test for inconsistent coin history.
function test_25() {
echo "=========25: inconsistent coin history========="
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
# Drop refund, so coin history is bogus.
echo "DELETE FROM exchange.refunds WHERE refund_serial_id=1;" | psql -Aqt $DB
run_audit aggregator
echo -n "Testing inconsistency detection... "
jq -e .coin_inconsistencies[0] < test-audit-aggregation.json > /dev/null || exit_fail "Coin inconsistency NOT detected"
# Note: if the wallet withdrew much more than it spent, this might indeed
# go legitimately unnoticed.
jq -e .emergencies[0] < test-audit-coins.json > /dev/null || exit_fail "Denomination value emergency NOT reported"
AMOUNT=`jq -er .total_coin_delta_minus < test-audit-aggregation.json`
if test x$AMOUNT = xTESTKUDOS:0
then
exit_fail "Expected non-zero total inconsistency amount from coins"
fi
# Note: if the wallet withdrew much more than it spent, this might indeed
# go legitimately unnoticed.
COUNT=`jq -er .emergencies_risk_by_amount < test-audit-coins.json`
if test x$AMOUNT = xTESTKUDOS:0
then
exit_fail "Expected non-zero emergency-by-amount"
fi
echo PASS
# cannot easily undo DELETE, hence full reload
full_reload
else
echo "Test skipped (database too new)"
fi
}
# Test for deposit wire target malformed
function test_26() {
echo "===========26: deposit wire target malformed ================="
# Expects 'payto_uri', not 'url' (also breaks signature, but we cannot even check that).
SERIAL=`echo "SELECT deposit_serial_id FROM exchange.deposits WHERE amount_with_fee_val=3 AND amount_with_fee_frac=0 ORDER BY deposit_serial_id LIMIT 1" | psql $DB -Aqt`
OLD_WIRE_ID=`echo "SELECT wire_target_h_payto FROM exchange.deposits WHERE deposit_serial_id=${SERIAL};" | psql $DB -Aqt`
NEW_WIRE_ID=`echo "INSERT INTO exchange.wire_targets (payto_uri, wire_target_h_payto) VALUES ('payto://x-taler-bank/localhost/testuser-xxlargtp', '\x1e8f31936b3cee8f8afd3aac9e38b5db42d45b721ffc4eb1e5b9ddaf1565660b');" | psql $DB -Aqt`
echo OLD_WIRE_ID=$OLD_WIRE_ID
echo NEW_WIRE_ID=$NEW_WIRE_ID
echo "UPDATE exchange.deposits SET wire_target_h_payto='\x1e8f31936b3cee8f8afd3aac9e38b5db42d45b721ffc4eb1e5b9ddaf1565660b' WHERE deposit_serial_id=${SERIAL}" | psql -Aqt $DB
run_audit
echo -n "Testing inconsistency detection... "
jq -e .bad_sig_losses[0] < test-audit-coins.json > /dev/null || exit_fail "Bad signature not detected"
ROW=`jq -e .bad_sig_losses[0].row < test-audit-coins.json`
if test $ROW != ${SERIAL}
then
exit_fail "Row wrong, got $ROW"
fi
LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:3"
then
exit_fail "Wrong deposit bad signature loss, got $LOSS"
fi
OP=`jq -r .bad_sig_losses[0].operation < test-audit-coins.json`
if test $OP != "deposit"
then
exit_fail "Wrong operation, got $OP"
fi
LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:3"
then
exit_fail "Wrong total bad sig loss, got $LOSS"
fi
echo PASS
# Undo:
echo "UPDATE exchange.deposits SET wire_target_h_payto='$OLD_WIRE_ID' WHERE deposit_serial_id=${SERIAL}" | psql -Aqt $DB
}
# Test for duplicate wire transfer subject
function test_27() {
echo "===========27: duplicate WTID detection ================="
# Check wire transfer lag reported (no aggregator!)
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
pre_audit aggregator
# Obtain data to duplicate.
WTID=`echo SELECT wtid FROM TalerRequestedPayments WHERE id=1 | sqlite3 $DB.sqlite3`
echo WTID=$WTID
OTHER_IBAN=`echo -e "SELECT iban FROM BankAccounts WHERE label='fortytwo'" | sqlite3 $DB.sqlite3`
# 'rawConfirmation' is set to 2 here, that doesn't
# point to any record. That's only needed to set a non null value.
echo -e "INSERT INTO PaymentInitiations (bankAccount,preparationDate,submissionDate,sum,currency,endToEndId,paymentInformationId,instructionId,subject,creditorIban,creditorBic,creditorName,submitted,messageId,rawConfirmation) VALUES (1,$(date +%s),$(expr $(date +%s) + 2),10,'TESTKUDOS','NOTGIVEN','unused','unused','$WTID http://exchange.example.com/','$OTHER_IBAN','SANDBOXX','Forty Two','unused',1,2)" | sqlite3 $DB.sqlite3
echo -e "INSERT INTO TalerRequestedPayments (facade,payment,requestUid,amount,exchangeBaseUrl,wtid,creditAccount) VALUES (1,2,'unused','TESTKUDOS:1','http://exchange.example.com/','$WTID','payto://iban/SANDBOXX/$OTHER_IBAN?receiver-name=Forty+Two')" | sqlite3 $DB.sqlite3
audit_only
post_audit
echo -n "Testing inconsistency detection... "
AMOUNT=`jq -r .wire_format_inconsistencies[0].amount < test-audit-wire.json`
if test "${AMOUNT}" != "TESTKUDOS:1"
then
exit_fail "Amount wrong, got ${AMOUNT}"
fi
AMOUNT=`jq -r .total_wire_format_amount < test-audit-wire.json`
if test "${AMOUNT}" != "TESTKUDOS:1"
then
exit_fail "Wrong total wire format amount, got $AMOUNT"
fi
# cannot easily undo aggregator, hence full reload
full_reload
else
echo "Test skipped (database too new)"
fi
}
# Test where denom_sig in known_coins table is wrong
# (=> bad signature) AND the coin is used in aggregation
function test_28() {
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
echo "===========28: known_coins signature wrong================="
# Modify denom_sig, so it is wrong
OLD_SIG=`echo 'SELECT denom_sig FROM exchange.known_coins LIMIT 1;' | psql $DB -Aqt`
COIN_PUB=`echo "SELECT coin_pub FROM exchange.known_coins WHERE denom_sig='$OLD_SIG';" | psql $DB -Aqt`
echo "UPDATE exchange.known_coins SET denom_sig='\x0000000100000000287369672d76616c200a2028727361200a2020287320233542383731423743393036444643303442424430453039353246413642464132463537303139374131313437353746324632323332394644443146324643333445393939413336363430334233413133324444464239413833353833464536354442374335434445304441453035374438363336434541423834463843323843344446304144363030343430413038353435363039373833434431333239393736423642433437313041324632414132414435413833303432434346314139464635394244434346374436323238344143354544364131373739463430353032323241373838423837363535453434423145443831364244353638303232413123290a2020290a20290b' WHERE coin_pub='$COIN_PUB'" | psql -Aqt $DB
run_audit aggregator
echo -n "Testing inconsistency detection... "
LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-aggregation.json`
if test $LOSS == "TESTKUDOS:0"
then
exit_fail "Wrong deposit bad signature loss, got $LOSS"
fi
OP=`jq -r .bad_sig_losses[0].operation < test-audit-aggregation.json`
if test $OP != "wire"
then
exit_fail "Wrong operation, got $OP"
fi
TAB=`jq -r .row_inconsistencies[0].table < test-audit-aggregation.json`
if test $TAB != "deposit"
then
exit_fail "Wrong table for row inconsistency, got $TAB"
fi
LOSS=`jq -r .total_bad_sig_loss < test-audit-aggregation.json`
if test $LOSS == "TESTKUDOS:0"
then
exit_fail "Wrong total bad sig loss, got $LOSS"
fi
echo "OK"
# cannot easily undo aggregator, hence full reload
full_reload
else
echo "Test skipped (database too new)"
fi
}
# Test where fees known to the auditor differ from those
# accounted for by the exchange
function test_29() {
echo "===========29: withdraw fee inconsistency ================="
echo "UPDATE exchange.denominations SET fee_withdraw_frac=5000000 WHERE coin_val=1;" | psql -Aqt $DB
run_audit
echo -n "Testing inconsistency detection... "
AMOUNT=`jq -r .total_balance_summary_delta_minus < test-audit-reserves.json`
if test "x$AMOUNT" == "xTESTKUDOS:0"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
PROFIT=`jq -r .amount_arithmetic_inconsistencies[0].profitable < test-audit-coins.json`
if test "x$PROFIT" != "x-1"
then
exit_fail "Reported wrong profitability: $PROFIT"
fi
echo "OK"
# Undo
echo "UPDATE exchange.denominations SET fee_withdraw_frac=2000000 WHERE coin_val=1;" | psql -Aqt $DB
}
# Test where fees known to the auditor differ from those
# accounted for by the exchange
function test_30() {
echo "===========30: melt fee inconsistency ================="
echo "UPDATE exchange.denominations SET fee_refresh_frac=5000000 WHERE coin_val=10;" | psql -Aqt $DB
run_audit
echo -n "Testing inconsistency detection... "
AMOUNT=`jq -r .bad_sig_losses[0].loss < test-audit-coins.json`
if test "x$AMOUNT" == "xTESTKUDOS:0"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
PROFIT=`jq -r .amount_arithmetic_inconsistencies[0].profitable < test-audit-coins.json`
if test "x$PROFIT" != "x-1"
then
exit_fail "Reported profitability wrong: $PROFIT"
fi
jq -e .emergencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run"
echo "OK"
# Undo
echo "UPDATE exchange.denominations SET fee_refresh_frac=3000000 WHERE coin_val=10;" | psql -Aqt $DB
}
# Test where fees known to the auditor differ from those
# accounted for by the exchange
function test_31() {
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
echo "===========31: deposit fee inconsistency ================="
echo "UPDATE exchange.denominations SET fee_deposit_frac=5000000 WHERE coin_val=8;" | psql -Aqt $DB
run_audit aggregator
echo -n "Testing inconsistency detection... "
AMOUNT=`jq -r .total_bad_sig_loss < test-audit-coins.json`
if test "x$AMOUNT" == "xTESTKUDOS:0"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
OP=`jq -r --arg dep "deposit" '.bad_sig_losses[] | select(.operation == $dep) | .operation'< test-audit-coins.json | head -n1`
if test "x$OP" != "xdeposit"
then
exit_fail "Reported wrong operation: $OP"
fi
echo "OK"
# Undo
echo "UPDATE exchange.denominations SET fee_deposit_frac=2000000 WHERE coin_val=8;" | psql -Aqt $DB
else
echo "Test skipped (database too new)"
fi
}
# Test where denom_sig in known_coins table is wrong
# (=> bad signature)
function test_32() {
# NOTE: This test is EXPECTED to fail for ~1h after
# re-generating the test database as we do not
# report lag of less than 1h (see GRACE_PERIOD in
# taler-helper-auditor-wire.c)
if [ $DATABASE_AGE -gt 3600 ]
then
echo "===========32: known_coins signature wrong w. aggregation================="
# Modify denom_sig, so it is wrong
OLD_SIG=`echo 'SELECT denom_sig FROM exchange.known_coins LIMIT 1;' | psql $DB -At`
COIN_PUB=`echo "SELECT coin_pub FROM exchange.known_coins WHERE denom_sig='$OLD_SIG';" | psql $DB -At`
echo "UPDATE exchange.known_coins SET denom_sig='\x0000000100000000287369672d76616c200a2028727361200a2020287320233542383731423743393036444643303442424430453039353246413642464132463537303139374131313437353746324632323332394644443146324643333445393939413336363430334233413133324444464239413833353833464536354442374335434445304441453035374438363336434541423834463843323843344446304144363030343430413038353435363039373833434431333239393736423642433437313041324632414132414435413833303432434346314139464635394244434346374436323238344143354544364131373739463430353032323241373838423837363535453434423145443831364244353638303232413123290a2020290a20290b' WHERE coin_pub='$COIN_PUB'" | psql -Aqt $DB
run_audit aggregator
echo -n "Testing inconsistency detection... "
AMOUNT=`jq -r .total_bad_sig_loss < test-audit-aggregation.json`
if test "x$AMOUNT" == "xTESTKUDOS:0"
then
exit_fail "Reported total amount wrong: $AMOUNT"
fi
OP=`jq -r .bad_sig_losses[0].operation < test-audit-aggregation.json`
if test "x$OP" != "xwire"
then
exit_fail "Reported wrong operation: $OP"
fi
echo "OK"
# Cannot undo aggregation, do full reload
full_reload
fi
}
function test_33() {
echo "===========33: normal run with aggregator and profit drain==========="
run_audit aggregator drain
echo "Checking output"
# if an emergency was detected, that is a bug and we should fail
echo -n "Test for emergencies... "
jq -e .emergencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo PASS
echo -n "Test for deposit confirmation emergencies... "
jq -e .deposit_confirmation_inconsistencies[0] < test-audit-deposits.json > /dev/null && exit_fail "Unexpected deposit confirmation inconsistency detected" || echo PASS
echo -n "Test for emergencies by count... "
jq -e .emergencies_by_count[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo PASS
echo -n "Test for wire inconsistencies... "
jq -e .wire_out_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run"
jq -e .reserve_in_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run"
jq -e .missattribution_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run"
jq -e .row_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run"
jq -e .denomination_key_validity_withdraw_inconsistencies[0] < test-audit-reserves.json > /dev/null && exit_fail "Unexpected denomination key withdraw inconsistency detected in ordinary run"
jq -e .row_minor_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run"
jq -e .lag_details[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected lag detected in ordinary run"
jq -e .wire_format_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run"
# TODO: check operation balances are correct (once we have all transaction types and wallet is deterministic)
# TODO: check revenue summaries are correct (once we have all transaction types and wallet is deterministic)
echo PASS
LOSS=`jq -r .total_bad_sig_loss < test-audit-aggregation.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong total bad sig loss from aggregation, got unexpected loss of $LOSS"
fi
LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong total bad sig loss from coins, got unexpected loss of $LOSS"
fi
LOSS=`jq -r .total_bad_sig_loss < test-audit-reserves.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong total bad sig loss from reserves, got unexpected loss of $LOSS"
fi
echo -n "Test for wire amounts... "
WIRED=`jq -r .total_wire_in_delta_plus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta plus wrong, got $WIRED"
fi
WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta minus wrong, got $WIRED"
fi
WIRED=`jq -r .total_wire_out_delta_plus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta plus wrong, got $WIRED"
fi
WIRED=`jq -r .total_wire_out_delta_minus < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total wire delta minus wrong, got $WIRED"
fi
WIRED=`jq -r .total_missattribution_in < test-audit-wire.json`
if test $WIRED != "TESTKUDOS:0"
then
exit_fail "Expected total missattribution in wrong, got $WIRED"
fi
echo PASS
echo -n "Checking for unexpected arithmetic differences "
LOSS=`jq -r .total_arithmetic_delta_plus < test-audit-aggregation.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from aggregations, got unexpected plus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_minus < test-audit-aggregation.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from aggregation, got unexpected minus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_plus < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from coins, got unexpected plus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_minus < test-audit-coins.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from coins, got unexpected minus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_plus < test-audit-reserves.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from reserves, got unexpected plus of $LOSS"
fi
LOSS=`jq -r .total_arithmetic_delta_minus < test-audit-reserves.json`
if test $LOSS != "TESTKUDOS:0"
then
exit_fail "Wrong arithmetic delta from reserves, got unexpected minus of $LOSS"
fi
DRAINED=`jq -r .total_drained < test-audit-wire.json`
if test $DRAINED != "TESTKUDOS:0.1"
then
exit_fail "Wrong amount drained, got unexpected drain of $DRAINED"
fi
jq -e .amount_arithmetic_inconsistencies[0] < test-audit-aggregation.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from aggregations detected in ordinary run"
jq -e .amount_arithmetic_inconsistencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from coins detected in ordinary run"
jq -e .amount_arithmetic_inconsistencies[0] < test-audit-reserves.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from reserves detected in ordinary run"
echo PASS
echo -n "Checking for unexpected wire out differences "
jq -e .wire_out_inconsistencies[0] < test-audit-aggregation.json > /dev/null && exit_fail "Unexpected wire out inconsistencies detected in ordinary run"
echo PASS
# cannot easily undo aggregator, hence full reload
full_reload
}
# *************** Main test loop starts here **************
# Run all the tests against the database given in $1.
# Sets $fail to 0 on success, non-zero on failure.
check_with_database()
{
BASEDB=$1
echo "Running test suite with database $BASEDB using configuration $CONF"
# Setup database-specific globals
MASTER_PUB=`cat ${BASEDB}.mpub`
# Determine database age
echo "Calculating database age based on ${BASEDB}.age"
AGE=`cat ${BASEDB}.age`
NOW=`date +%s`
# NOTE: expr "fails" if the result is zero.
DATABASE_AGE=`expr ${NOW} - ${AGE} || true`
echo "Database age is ${DATABASE_AGE} seconds"
# Load database
full_reload
# Run test suite
fail=0
for i in $TESTS
do
test_$i
if test 0 != $fail
then
break
fi
done
echo "Cleanup (disabled, leaving database $DB behind)"
# dropdb $DB
}
# *************** Main logic starts here **************
# ####### Setup globals ######
# Postgres database to use
DB=auditor-basedb
# Configuration file to use
CONF=${DB}.conf
# test required commands exist
echo "Testing for jq"
jq -h > /dev/null || exit_skip "jq required"
# NOTE: really check for all three libeufin commands?
echo "Testing for libeufin"
libeufin-cli --help >/dev/null </dev/null || exit_skip "libeufin required"
echo "Testing for pdflatex"
which pdflatex > /dev/null </dev/null || exit_skip "pdflatex required"
# check if we should regenerate the database
if test -n "${1:-}"
then
echo "Custom run, will only run on existing DB."
else
echo -n "Testing for taler-wallet-cli"
if taler-wallet-cli -h >/dev/null </dev/null 2>/dev/null
then
MYDIR=`mktemp -d /tmp/taler-auditor-basedbXXXXXX`
echo " FOUND. Generating fresh database at $MYDIR"
pwd
if ./generate-auditor-basedb.sh $MYDIR/basedb
then
check_with_database $MYDIR/basedb
if test x$fail != x0
then
exit $fail
else
echo "Cleaning up $MYDIR..."
rm -rf $MYDIR || echo "Removing $MYDIR failed"
fi
else
echo "Generation failed, running only on existing DB"
fi
else
echo " NOT FOUND, running only on existing DB"
fi
fi
# run tests with pre-build database, if one is available
if test -r auditor-basedb.mpub
then
check_with_database "auditor-basedb"
else
echo "Lacking auditor-basedb.mpub, skipping test"
fail=77
fi
exit $fail
Reference in New Issue View Git Blame Copy Permalink