#!/bin/bash # Setup database which was generated from a perfectly normal # exchange-wallet interaction and run the auditor against it. # # Check that the auditor report is as expected. # # Requires 'jq' tool and Postgres superuser rights! set -eu # Set of numbers for all the testcases. # When adding new tests, increase the last number: ALL_TESTS=`seq 0 5` # $TESTS determines which tests we should run. # This construction is used to make it easy to # only run a subset of the tests. To only run a subset, # pass the numbers of the tests to run as the FIRST # argument to test-auditor.sh, i.e.: # # $ test-auditor.sh "1 3" # # to run tests 1 and 3 only. By default, all tests are run. # TESTS=${1:-$ALL_TESTS} # Exit, with status code "skip" (no 'real' failure) function exit_skip() { echo $1 exit 77 } # Exit, with error message (hard failure) function exit_fail() { echo $1 kill `jobs -p` exit 1 } # Run audit process on current database, including report # generation. Pass "aggregator" as $1 to run # $ taler-exchange-aggregator # before auditor (to trigger pending wire transfers). function run_audit () { # Launch bank echo "Launching bank" taler-bank-manage -c test-auditor.conf serve-http 2>bank.err >bank.log & while true do echo -n "." wget http://localhost:8082/ -o /dev/null -O /dev/null >/dev/null && break sleep 1 done echo "OK" if test ${1:-no} = "aggregator" then echo "Running exchange aggregator" taler-exchange-aggregator -t -c test-auditor.conf fi # Run the auditor! echo "Running audit(s)" taler-auditor -r -c test-auditor.conf -m $MASTER_PUB > test-audit.json 2> test-audit.log || exit_fail "auditor failed" taler-wire-auditor -r -c test-auditor.conf -m $MASTER_PUB > test-wire-audit.json 2> test-wire-audit.log || exit_fail "wire auditor failed" echo "Shutting down services" kill `jobs -p` || true echo "TeXing" ../../contrib/render.py test-audit.json test-wire-audit.json < ../../contrib/auditor-report.tex.j2 > test-report.tex || exit_fail "Renderer failed" timeout 10 pdflatex test-report.tex >/dev/null || exit_fail "pdflatex failed" timeout 10 pdflatex test-report.tex >/dev/null } # Do a full reload of the (original) database full_reload() { dropdb $DB 2> /dev/null || true createdb -T template0 $DB || exit_skip "could not create database" # Import pre-generated database, -q(ietly) using single (-1) transaction psql -Aqt $DB -q -1 -f ../benchmark/auditor-basedb.sql > /dev/null } test_0() { echo "===========0: normal run with aggregator===========" run_audit aggregator echo "Checking output" # if an emergency was detected, that is a bug and we should fail echo -n "Test for emergencies... " jq -e .emergencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo OK jq -e .emergencies_by_count[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo OK echo -n "Test for wire inconsistencies... " jq -e .wire_out_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run" jq -e .reserve_in_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run" jq -e .missattribution_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run" jq -e .row_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run" jq -e .row_minor_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run" jq -e .lag_details[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected lag detected in ordinary run" jq -e .wire_format_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run" # FIXME: check operation balances are correct (once we have more transaction types) # FIXME: check revenue summaries are correct (once we have more transaction types) echo OK echo -n "Test for wire amounts... " WIRED=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta plus wrong, got $WIRED" fi WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta minus wrong, got $WIRED" fi WIRED=`jq -r .total_wire_out_delta_plus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta plus wrong, got $WIRED" fi WIRED=`jq -r .total_wire_out_delta_minus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta minus wrong, got $WIRED" fi WIRED=`jq -r .total_missattribution_in < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total missattribution in wrong, got $WIRED" fi # FIXME: check NO lag reported # cannot easily undo aggregator, hence full reload full_reload echo "OK" } # Run without aggregator, hence auditor should detect wire # transfer lag! test_1() { echo "===========1: normal run===========" run_audit echo "Checking output" # if an emergency was detected, that is a bug and we should fail echo -n "Test for emergencies... " jq -e .emergencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo OK jq -e .emergencies_by_count[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo OK echo -n "Test for wire inconsistencies... " jq -e .wire_out_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run" jq -e .reserve_in_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run" jq -e .missattribution_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run" jq -e .row_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run" jq -e .row_minor_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run" jq -e .lag_details[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected lag detected in ordinary run" jq -e .wire_format_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run" # FIXME: check operation balances are correct (once we have more transaction types) # FIXME: check revenue summaries are correct (once we have more transaction types) echo OK # FIXME: check wire transfer lag reported (no aggregator!) echo -n "Test for wire amounts... " WIRED=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta plus wrong, got $WIRED" fi WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta minus wrong, got $WIRED" fi WIRED=`jq -r .total_wire_out_delta_plus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta plus wrong, got $WIRED" fi WIRED=`jq -r .total_wire_out_delta_minus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta minus wrong, got $WIRED" fi WIRED=`jq -r .total_missattribution_in < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total missattribution in wrong, got $WIRED" fi # Database was unmodified, no need to undo echo "OK" } # Change amount of wire transfer reported by exchange test_2() { echo "===========2: reserves_in inconsitency===========" echo "UPDATE reserves_in SET credit_val=5 WHERE reserve_in_serial_id=1" | psql -Aqt $DB run_audit echo -n "Test for inconsistency detection... " ROW=`jq .reserve_in_amount_inconsistencies[0].row < test-wire-audit.json` if test $ROW != 1 then exit_fail "Row wrong" fi WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_wired < test-wire-audit.json` if test $WIRED != "TESTKUDOS:10" then exit_fail "Amount wrong" fi EXPECTED=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-wire-audit.json` if test $EXPECTED != "TESTKUDOS:5" then exit_fail "Expected amount wrong" fi WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Wrong total wire_in_delta_minus, got $WIRED" fi DELTA=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` if test $DELTA != "TESTKUDOS:5" then exit_fail "Expected total wire delta plus wrong" fi echo OK # Undo database modification echo "UPDATE reserves_in SET credit_val=10 WHERE reserve_in_serial_id=1" | psql -Aqt $DB } # Check for incoming wire transfer amount given being # lower than what exchange claims to have received. test_3() { echo "===========3: reserves_in inconsitency===========" echo "UPDATE reserves_in SET credit_val=15 WHERE reserve_in_serial_id=1" | psql -Aqt $DB run_audit EXPECTED=`jq -r .reserve_balance_summary_wrong_inconsistencies[0].auditor < test-audit.json` if test $EXPECTED != "TESTKUDOS:5.01" then exit_fail "Expected reserve balance summary amount wrong, got $EXPECTED (auditor)" fi EXPECTED=`jq -r .reserve_balance_summary_wrong_inconsistencies[0].exchange < test-audit.json` if test $EXPECTED != "TESTKUDOS:0.01" then exit_fail "Expected reserve balance summary amount wrong, got $EXPECTED (exchange)" fi WIRED=`jq -r .total_loss_balance_insufficient < test-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Wrong total loss from insufficient balance, got $WIRED" fi ROW=`jq -e .reserve_in_amount_inconsistencies[0].row < test-wire-audit.json` if test $ROW != 1 then exit_fail "Row wrong, got $ROW" fi WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-wire-audit.json` if test $WIRED != "TESTKUDOS:15" then exit_fail "Wrong amount_exchange_expected, got $WIRED" fi WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_wired < test-wire-audit.json` if test $WIRED != "TESTKUDOS:10" then exit_fail "Wrong amount_wired, got $WIRED" fi WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:5" then exit_fail "Wrong total wire_in_delta_minus, got $WIRED" fi WIRED=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Wrong total wire_in_delta_plus, got $WIRED" fi # Undo database modification echo "UPDATE reserves_in SET credit_val=10 WHERE reserve_in_serial_id=1" | psql -Aqt $DB } # Check for incoming wire transfer amount given being # lower than what exchange claims to have received. test_4() { echo "===========4: deposit wire target wrong=================" # Original target bank account was 43, changing to 44 echo "UPDATE deposits SET wire='{\"url\":\"payto://x-taler-bank/localhost:8082/44\",\"salt\":\"test-salt (must be constant for aggregation tests)\"}' WHERE deposit_serial_id=1" | psql -Aqt $DB run_audit ROW=`jq -e .bad_sig_losses[0].row < test-audit.json` if test $ROW != 1 then exit_fail "Row wrong, got $ROW" fi LOSS=`jq -r .bad_sig_losses[0].loss < test-audit.json` if test $LOSS != "TESTKUDOS:0.1" then exit_fail "Wrong deposit bad signature loss, got $LOSS" fi OP=`jq -r .bad_sig_losses[0].operation < test-audit.json` if test $OP != "deposit" then exit_fail "Wrong operation, got $OP" fi LOSS=`jq -r .total_bad_sig_loss < test-audit.json` if test $LOSS != "TESTKUDOS:0.1" then exit_fail "Wrong total bad sig loss, got $LOSS" fi # Undo: echo "UPDATE deposits SET wire='{\"url\":\"payto://x-taler-bank/localhost:8082/43\",\"salt\":\"test-salt (must be constant for aggregation tests)\"}' WHERE deposit_serial_id=1" | psql -Aqt $DB } # Test where h_contract_terms in the deposit table is wrong # (=> bad signature) test_5() { echo "===========5: deposit contract hash wrong=================" # Modify h_wire hash, so it is inconsistent with 'wire' OLD_H=`echo 'SELECT h_contract_terms FROM deposits WHERE deposit_serial_id=1;' | psql taler-auditor-test -Aqt` echo "UPDATE deposits SET h_contract_terms='\x12bb676444955c98789f219148aa31899d8c354a63330624d3d143222cf3bb8b8e16f69accd5a8773127059b804c1955696bf551dd7be62719870613332aa8d5' WHERE deposit_serial_id=1" | psql -Aqt $DB run_audit ROW=`jq -e .bad_sig_losses[0].row < test-audit.json` if test $ROW != 1 then exit_fail "Row wrong, got $ROW" fi LOSS=`jq -r .bad_sig_losses[0].loss < test-audit.json` if test $LOSS != "TESTKUDOS:0.1" then exit_fail "Wrong deposit bad signature loss, got $LOSS" fi OP=`jq -r .bad_sig_losses[0].operation < test-audit.json` if test $OP != "deposit" then exit_fail "Wrong operation, got $OP" fi LOSS=`jq -r .total_bad_sig_loss < test-audit.json` if test $LOSS != "TESTKUDOS:0.1" then exit_fail "Wrong total bad sig loss, got $LOSS" fi # Undo: echo "UPDATE deposits SET h_contract_terms='${OLD_H}' WHERE deposit_serial_id=1" | psql -Aqt $DB } # Test where denom_sig in known_coins table is wrong # (=> bad signature) test_6() { echo "===========6: known_coins signature wrong=================" # Modify denom_sig, so it is wrong OLD_SIG=`echo 'SELECT denom_sig FROM known_coins LIMIT 1;' | psql taler-auditor-test -Aqt` COIN_PUB=`echo "SELECT coin_pub FROM known_coins WHERE denom_sig='$OLD_SIG';" | psql taler-auditor-test -Aqt` echo "UPDATE known_coins SET denom_sig='\x287369672d76616c200a2028727361200a2020287320233542383731423743393036444643303442424430453039353246413642464132463537303139374131313437353746324632323332394644443146324643333445393939413336363430334233413133324444464239413833353833464536354442374335434445304441443035374438363336434541423834463843323843344446304144363030343430413038353435363039373833434431333239393736423642433437313041324632414132414435413833303432434346314139464635394244434346374436323238344143354544364131373739463430353032323241373838423837363535453434423145443831364244353638303232413123290a2020290a20290b' WHERE coin_pub='$COIN_PUB'" | psql -Aqt $DB run_audit # FIXME: add logic to check bad signature was detected # (NOTE: FIXME42-bug: auditor does not yet check denom_sigs!) # Undo echo "UPDATE known_coins SET denom_sig='$OLD_SIG' WHERE coin_pub='$COIN_PUB'" | psql -Aqt $DB } # Test where h_wire in the deposit table is wrong test_99() { echo "===========99: deposit wire hash wrong=================" # Modify h_wire hash, so it is inconsistent with 'wire' echo "UPDATE deposits SET h_wire='\x973e52d193a357940be9ef2939c19b0575ee1101f52188c3c01d9005b7d755c397e92624f09cfa709104b3b65605fe5130c90d7e1b7ee30f8fc570f39c16b853' WHERE deposit_serial_id=1" | psql -Aqt $DB # The auditor checks h_wire consistency only for # coins where the wire transfer has happened, hence # run aggregator first to get this test to work. # # FIXME: current test database has transfers still # in the *distant* future, test cannot yet work. # patch up once DB was re-generated! run_audit aggregator # FIXME: check for the respective inconsistency in the report! # Undo: # echo "UPDATE deposits SET h_wire='\x973e52d193a357940be9ef2939c19b0575ee1101f52188c3c01d9005b7d755c397e92624f09cfa709104b3b65605fe5130c90d7e1b7ee30f8fc570f39c16b852' WHERE deposit_serial_id=1" | psql -Aqt $DB } # ************************************************** # Add more tests here! :-) # ************************************************** # *************** Main logic starts here ************** # Setup globals DB=taler-auditor-test MASTER_PUB=`cat ../benchmark/auditor-basedb.mpub` # test required commands exist echo "Testing for jq" jq -h > /dev/null || exit_skip "jq required" echo "Testing for taler-bank-manage" taler-bank-manage -h >/dev/null /dev/null