taler/exchange
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
25ca8f90ad
exchange/src/exchange-lib/testing_api_cmd_track.c

814 lines
22 KiB
C
Raw Normal View History

Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
/*
This file is part of TALER
Copyright (C) 2014-2018 Taler Systems SA
TALER is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 3, or
(at your option) any later version.
TALER is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public
License along with TALER; see the file COPYING. If not, see
<http://www.gnu.org/licenses/>
*/
/**
* @file exchange/testing_api_cmd_status.c
* @brief Implement the /reserve/status test command.
* @author Marcello Stanisci
*/
#include "platform.h"
#include "taler_json_lib.h"
#include <gnunet/gnunet_curl_lib.h>
#include "exchange_api_handle.h"
#include "taler_testing_lib.h"
struct TrackTransactionState
{
/**
* Which #OC_CHECK_BANK_TRANSFER wtid should this match? NULL
* for none.
*/
const char *bank_transfer_reference;
/**
* Wire transfer identifier, set if #MHD_HTTP_OK was the
* response code.
*/
struct TALER_WireTransferIdentifierRawP wtid;
/**
* Expected HTTP response code.
*/
unsigned int expected_response_code;
/**
* Reference to any operation that can provide a transaction.
* Tipically a /deposit operation.
*/
const char *transaction_reference;
/**
* Index of the coin involved in the transaction.
*/
unsigned int coin_index;
/**
* Handle to the deposit wtid request.
*/
struct TALER_EXCHANGE_TrackTransactionHandle *tth;
/**
* Handle to the exchange.
*/
struct TALER_EXCHANGE_Handle *exchange;
/**
* Interpreter state.
*/
struct TALER_TESTING_Interpreter *is;
};
struct TrackTransferState
{
/**
* Expected amount for this WTID.
*/
const char *expected_total_amount;
/**
* Expected fee for this WTID.
*/
const char *expected_wire_fee;
/**
* Expected HTTP response code.
*/
unsigned int expected_response_code;
/**
* Reference to any operation that can provide a WTID.
*/
const char *wtid_reference;
/**
* Reference to any operation that can provide wire details.
*/
const char *wire_details_reference;
/**
* Reference to any operation that can provide an amount.
*/
const char *total_amount_reference;
/**
* Index to the WTID to pick.
*/
unsigned int index;
/**
* Handle to the deposit wtid request.
*/
struct TALER_EXCHANGE_TrackTransferHandle *tth;
/**
* Handle to the exchange.
*/
struct TALER_EXCHANGE_Handle *exchange;
/**
* Interpreter state.
*/
struct TALER_TESTING_Interpreter *is;
};
/**
* Function called with detailed wire transfer data.
*
* @param cls closure
* @param http_status HTTP status code we got, 0 on exchange
* protocol violation
* @param ec taler-specific error code, #TALER_EC_NONE on success
* @param exchange_pub public key the exchange used for signing
* @param json original json reply (may include signatures, those
* have then been validated already)
* @param wtid wire transfer identifier used by the exchange, NULL
* if exchange did not yet execute the transaction
* @param execution_time actual or planned execution time for the
* wire transfer
* @param coin_contribution contribution to the @a total_amount of
* the deposited coin (may be NULL)
* @param total_amount total amount of the wire transfer, or NULL
* if the exchange could not provide any @a wtid (set only
* if @a http_status is #MHD_HTTP_OK)
*/
static void
deposit_wtid_cb
(void *cls,
unsigned int http_status,
enum TALER_ErrorCode ec,
const struct TALER_ExchangePublicKeyP *exchange_pub,
const json_t *json,
const struct TALER_WireTransferIdentifierRawP *wtid,
struct GNUNET_TIME_Absolute execution_time,
const struct TALER_Amount *coin_contribution)
{
struct TrackTransactionState *tts = cls;
struct TALER_TESTING_Interpreter *is = tts->is;
struct TALER_TESTING_Command *cmd = &is->commands[is->ip];
tts->tth = NULL;
if (tts->expected_response_code != http_status)
{
GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
"Unexpected response code %u to command %s\n",
http_status,
cmd->label);
json_dumpf (json, stderr, 0);
TALER_TESTING_interpreter_fail (is);
return;
}
switch (http_status)
{
case MHD_HTTP_OK:
tts->wtid = *wtid;
if (NULL != tts->bank_transfer_reference)
{
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
const struct TALER_TESTING_Command *bank_transfer_cmd;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
char *ws;
ws = GNUNET_STRINGS_data_to_string_alloc (wtid,
sizeof (*wtid));
bank_transfer_cmd = TALER_TESTING_interpreter_lookup_command
(is, tts->bank_transfer_reference);
if (NULL == bank_transfer_cmd)
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (is);
return;
}
Bank-lib tests, using the new (libraries-based) style.
2018-02-22 14:51:12 +01:00
const char *transfer_subject;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
if (GNUNET_OK != TALER_TESTING_get_trait_transfer_subject
(bank_transfer_cmd, 0, &transfer_subject))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (is);
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
if (0 != strcmp (ws, transfer_subject))
{
GNUNET_break (0);
GNUNET_free (ws);
TALER_TESTING_interpreter_fail (tts->is);
return;
}
GNUNET_free (ws);
}
break;
case MHD_HTTP_ACCEPTED:
/* allowed, nothing to check here */
break;
case MHD_HTTP_NOT_FOUND:
/* allowed, nothing to check here */
break;
default:
GNUNET_break (0);
break;
}
TALER_TESTING_interpreter_next (tts->is);
}
/**
* Run the command.
*
* @param cls closure, typically a #struct WireState.
* @param cmd the command to execute, a /track/transaction one.
* @param is the interpreter state.
*/
void
track_transaction_run (void *cls,
const struct TALER_TESTING_Command *cmd,
struct TALER_TESTING_Interpreter *is)
{
struct TrackTransactionState *tts = cls;
const struct TALER_TESTING_Command *transaction_cmd;
struct TALER_CoinSpendPrivateKeyP *coin_priv;
struct TALER_CoinSpendPublicKeyP coin_pub;
const char *contract_terms;
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
const json_t *wire_details;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
json_t *j_contract_terms;
struct GNUNET_HashCode h_wire_details;
struct GNUNET_HashCode h_contract_terms;
const struct GNUNET_CRYPTO_EddsaPrivateKey *merchant_priv;
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
tts->is = is;
transaction_cmd = TALER_TESTING_interpreter_lookup_command
(tts->is, tts->transaction_reference);
if (NULL == transaction_cmd)
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (tts->is);
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
if (GNUNET_OK != TALER_TESTING_get_trait_coin_priv
(transaction_cmd, tts->coin_index, &coin_priv))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (tts->is);
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
GNUNET_CRYPTO_eddsa_key_get_public (&coin_priv->eddsa_priv,
&coin_pub.eddsa_pub);
/* Get the strings.. */
if (GNUNET_OK != TALER_TESTING_get_trait_wire_details
(transaction_cmd, 0, &wire_details))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (tts->is);
return;
}
if (GNUNET_OK != TALER_TESTING_get_trait_contract_terms
(transaction_cmd, 0, &contract_terms))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (tts->is);
return;
}
/* Parse them.. */
j_contract_terms = json_loads
(contract_terms, JSON_REJECT_DUPLICATES, NULL);
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
if ((NULL == wire_details) || (NULL == j_contract_terms))
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (tts->is);
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
/* Should not fail here, json has been parsed already */
GNUNET_assert
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
( (GNUNET_OK ==
TALER_JSON_wire_signature_hash (wire_details,
&h_wire_details)) &&
(GNUNET_OK ==
TALER_JSON_hash (j_contract_terms,
&h_contract_terms)) );
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
if (GNUNET_OK != TALER_TESTING_get_trait_peer_key
(transaction_cmd, 0, &merchant_priv))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (tts->is);
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
tts->tth = TALER_EXCHANGE_track_transaction
(tts->exchange,
(struct TALER_MerchantPrivateKeyP *) merchant_priv,
&h_wire_details,
&h_contract_terms,
&coin_pub,
&deposit_wtid_cb,
tts);
GNUNET_assert (NULL != tts->tth);
}
/**
* Cleanup the state.
*
* @param cls closure, typically a #struct WireState.
* @param cmd the command which is being cleaned up.
*/
void
track_transaction_cleanup
(void *cls,
const struct TALER_TESTING_Command *cmd)
{
struct TrackTransactionState *tts = cls;
if (NULL != tts->tth)
{
GNUNET_log (GNUNET_ERROR_TYPE_WARNING,
"Command %u (%s) did not complete\n",
tts->is->ip,
cmd->label);
TALER_EXCHANGE_track_transaction_cancel (tts->tth);
tts->tth = NULL;
}
GNUNET_free (tts);
}
/**
* Extract information from a command that is useful for other
* commands.
*
* @param cls closure
* @param ret[out] result (could be anything)
* @param trait name of the trait
* @param selector more detailed information about which object
* to return in case there were multiple generated
* by the command
* @return #GNUNET_OK on success
*/
static int
track_transaction_traits (void *cls,
void **ret,
const char *trait,
unsigned int index)
{
struct TrackTransactionState *tts = cls;
struct TALER_TESTING_Trait traits[] = {
TALER_TESTING_make_trait_wtid (0, &tts->wtid),
TALER_TESTING_trait_end ()
};
return TALER_TESTING_get_trait (traits,
ret,
trait,
index);
}
/**
* Create a /track/transaction command.
*
* @param label the command label.
* @param exchange the exchange to connect to.
* @param transaction_reference reference to a deposit operation.
* @param coin_index index of the coin involved in the transaction
* @param expected_response_code expected HTTP response code.
* @param bank_transfer_reference which #OC_CHECK_BANK_TRANSFER
* wtid should this match? NULL
* for none
*
* @return the command to be executed by the interpreter.
*/
struct TALER_TESTING_Command
TALER_TESTING_cmd_track_transaction
(const char *label,
struct TALER_EXCHANGE_Handle *exchange,
const char *transaction_reference,
unsigned int coin_index,
unsigned int expected_response_code,
const char *bank_transfer_reference)
{
struct TALER_TESTING_Command cmd;
struct TrackTransactionState *tts;
tts = GNUNET_new (struct TrackTransactionState);
tts->exchange = exchange;
tts->transaction_reference = transaction_reference;
tts->expected_response_code = expected_response_code;
tts->bank_transfer_reference = bank_transfer_reference;
tts->coin_index = coin_index;
cmd.cls = tts;
cmd.label = label;
cmd.run = &track_transaction_run;
cmd.cleanup = &track_transaction_cleanup;
cmd.traits = &track_transaction_traits;
return cmd;
}
/**
* Cleanup the state.
*
* @param cls closure.
* @param cmd the command which is being cleaned up.
*/
void
track_transfer_cleanup (void *cls,
const struct TALER_TESTING_Command *cmd)
{
struct TrackTransferState *tts = cls;
if (NULL != tts->tth)
{
GNUNET_log (GNUNET_ERROR_TYPE_WARNING,
"Command %u (%s) did not complete\n",
tts->is->ip,
cmd->label);
TALER_EXCHANGE_track_transfer_cancel (tts->tth);
tts->tth = NULL;
}
GNUNET_free (tts);
}
/**
* Function called with detailed wire transfer data, including all
* of the coin transactions that were combined into the wire
* transfer.
*
* @param cls closure
* @param http_status HTTP status code we got, 0 on exchange
* protocol violation
* @param ec taler-specific error code, #TALER_EC_NONE on success
* @param exchange_pub public key the exchange used for signing
* @param json original json reply (may include signatures, those
* have then been validated already)
* @param h_wire hash of the wire transfer address the transfer
* went to, or NULL on error
* @param execution_time time when the exchange claims to have
* performed the wire transfer
* @param total_amount total amount of the wire transfer, or NULL
* if the exchange could not provide any @a wtid (set only
* if @a http_status is #MHD_HTTP_OK)
* @param wire_fee wire fee that was charged by the exchange
* @param details_length length of the @a details array
* @param details array with details about the combined
* transactions
*/
static void
track_transfer_cb
(void *cls,
unsigned int http_status,
enum TALER_ErrorCode ec,
const struct TALER_ExchangePublicKeyP *exchange_pub,
const json_t *json,
const struct GNUNET_HashCode *h_wire,
struct GNUNET_TIME_Absolute execution_time,
const struct TALER_Amount *total_amount,
const struct TALER_Amount *wire_fee,
unsigned int details_length,
const struct TALER_TrackTransferDetails *details)
{
struct TrackTransferState *tts = cls;
struct TALER_TESTING_Interpreter *is = tts->is;
struct TALER_TESTING_Command *cmd = &is->commands[is->ip];
const struct TALER_TESTING_Command *wtid_cmd;
struct TALER_Amount expected_amount;
tts->tth = NULL;
if (tts->expected_response_code != http_status)
{
GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
"Unexpected response code %u to command %s\n",
http_status,
cmd->label);
json_dumpf (json, stderr, 0);
TALER_TESTING_interpreter_fail (is);
return;
}
fix compiler warning
2018-04-03 23:31:18 +02:00
if ( (NULL == tts->expected_total_amount) ||
(NULL == tts->expected_wire_fee) )
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
GNUNET_log (GNUNET_ERROR_TYPE_WARNING,
"Expected amount and fee not specified, "
"likely to segfault...\n");
fix compiler warning
2018-04-03 23:31:18 +02:00
switch (http_status)
{
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
case MHD_HTTP_OK:
if (GNUNET_OK !=
TALER_string_to_amount (tts->expected_total_amount,
&expected_amount))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (is);
return;
}
if (0 != TALER_amount_cmp (total_amount,
&expected_amount))
{
GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
"Total amount missmatch to command %s - "
"%s vs %s\n",
cmd->label,
TALER_amount_to_string (total_amount),
TALER_amount_to_string (&expected_amount));
json_dumpf (json, stderr, 0);
fprintf (stderr, "\n");
TALER_TESTING_interpreter_fail (is);
return;
}
if (GNUNET_OK !=
TALER_string_to_amount (tts->expected_wire_fee,
&expected_amount))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (is);
return;
}
if (0 != TALER_amount_cmp (wire_fee,
&expected_amount))
{
GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
"Wire fee missmatch to command %s\n",
cmd->label);
json_dumpf (json, stderr, 0);
TALER_TESTING_interpreter_fail (is);
return;
}
wtid_cmd = TALER_TESTING_interpreter_lookup_command
(is, tts->wtid_reference);
if (NULL == wtid_cmd)
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (is);
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
/**
* Optionally checking: (1) wire-details for this transfer
* match the ones from a referenced "deposit" operation -
* or any operation that could provide wire-details. (2)
* Total amount for this transfer matches the one from any
* referenced command that could provide one.
*/
if (NULL != tts->wire_details_reference)
{
const struct TALER_TESTING_Command *wire_details_cmd;
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
const json_t *wire_details;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
struct GNUNET_HashCode h_wire_details;
if (NULL == (wire_details_cmd
= TALER_TESTING_interpreter_lookup_command
(is, tts->wire_details_reference)))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (is);
return;
}
if (GNUNET_OK != TALER_TESTING_get_trait_wire_details
(wire_details_cmd, 0, &wire_details))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (is);
return;
}
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
GNUNET_assert (GNUNET_OK ==
TALER_JSON_wire_signature_hash (wire_details,
&h_wire_details));
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
if (0 != memcmp (&h_wire_details,
h_wire,
sizeof (struct GNUNET_HashCode)))
{
GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
"Wire hash missmath to command %s\n",
cmd->label);
json_dumpf (json, stderr, 0);
TALER_TESTING_interpreter_fail (is);
return;
}
}
if (NULL != tts->total_amount_reference)
{
const struct TALER_TESTING_Command *total_amount_cmd;
const char *total_amount_from_reference_str;
struct TALER_Amount total_amount_from_reference;
if (NULL == (total_amount_cmd
= TALER_TESTING_interpreter_lookup_command
(is, tts->total_amount_reference)))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (is);
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
if (GNUNET_OK != TALER_TESTING_get_trait_amount
(total_amount_cmd, 0, &total_amount_from_reference_str))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (is);
return;
}
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
GNUNET_assert (GNUNET_OK == TALER_string_to_amount
(total_amount_from_reference_str,
&total_amount_from_reference));
if (0 != TALER_amount_cmp (total_amount,
&total_amount_from_reference))
{
GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
"Amount missmath to command %s\n",
cmd->label);
json_dumpf (json, stderr, 0);
TALER_TESTING_interpreter_fail (is);
return;
}
}
}
TALER_TESTING_interpreter_next (is);
}
/**
* Run the command.
*
* @param cls closure.
* @param cmd the command to execute, a /track/transfer one.
* @param is the interpreter state.
*/
void
track_transfer_run (void *cls,
const struct TALER_TESTING_Command *cmd,
struct TALER_TESTING_Interpreter *is)
{
/* looking for a wtid to track .. */
struct TrackTransferState *tts = cls;
struct TALER_WireTransferIdentifierRawP wtid;
struct TALER_WireTransferIdentifierRawP *wtid_ptr;
/* If no reference is given, we'll use a all-zeros
* WTID */
memset (&wtid, 0, sizeof (wtid));
wtid_ptr = &wtid;
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
tts->is = is;
if (NULL != tts->wtid_reference)
{
const struct TALER_TESTING_Command *wtid_cmd;
wtid_cmd = TALER_TESTING_interpreter_lookup_command
(tts->is, tts->wtid_reference);
if (NULL == wtid_cmd)
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (tts->is);
return;
}
if (GNUNET_OK != TALER_TESTING_get_trait_wtid
(wtid_cmd, tts->index, &wtid_ptr))
{
GNUNET_break (0);
TALER_TESTING_interpreter_fail (tts->is);
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
fix reject test command.
2018-02-27 22:49:18 +01:00
GNUNET_assert (NULL != wtid_ptr);
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
tts->tth = TALER_EXCHANGE_track_transfer (tts->exchange,
wtid_ptr,
&track_transfer_cb,
tts);
GNUNET_assert (NULL != tts->tth);
}
/**
* Make a /track/transfer command, expecting the transfer
* not being done (yet).
*
* @param label the command label
* @param exchange connection to the exchange
* @param wtid_reference reference to any command which can provide
* a wtid
* @param index in case there are multiple wtid offered, this
* parameter selects a particular one
* @param expected_response_code expected HTTP response code
*
* @return the command
*/
struct TALER_TESTING_Command
TALER_TESTING_cmd_track_transfer_empty
(const char *label,
struct TALER_EXCHANGE_Handle *exchange,
const char *wtid_reference,
unsigned int index,
unsigned int expected_response_code)
{
struct TrackTransferState *tts;
struct TALER_TESTING_Command cmd;
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
tts = GNUNET_new (struct TrackTransferState);
tts->wtid_reference = wtid_reference;
tts->index = index;
tts->expected_response_code = expected_response_code;
tts->exchange = exchange;
cmd.cls = tts;
cmd.label = label;
cmd.run = &track_transfer_run;
cmd.cleanup = &track_transfer_cleanup;
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return cmd;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
/**
* Make a /track/transfer command, specifying which amount and
* wire fee are expected.
*
* @param label the command label
* @param exchange connection to the exchange
* @param wtid_reference reference to any command which can provide
* a wtid
* @param index in case there are multiple wtid offered, this
* parameter selects a particular one
* @param expected_response_code expected HTTP response code
* @param expected_amount how much money we expect being
* moved with this wire-transfer.
* @param expected_wire_fee expected wire fee.
*
* @return the command
*/
struct TALER_TESTING_Command
TALER_TESTING_cmd_track_transfer
(const char *label,
struct TALER_EXCHANGE_Handle *exchange,
const char *wtid_reference,
unsigned int index,
unsigned int expected_response_code,
const char *expected_total_amount,
const char *expected_wire_fee)
{
struct TrackTransferState *tts;
struct TALER_TESTING_Command cmd;
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
tts = GNUNET_new (struct TrackTransferState);
tts->wtid_reference = wtid_reference;
tts->index = index;
tts->expected_response_code = expected_response_code;
tts->exchange = exchange;
tts->expected_total_amount = expected_total_amount;
tts->expected_wire_fee = expected_wire_fee;
cmd.cls = tts;
cmd.label = label;
cmd.run = &track_transfer_run;
cmd.cleanup = &track_transfer_cleanup;
Changing configuration structure to enable multiple accounts. This change enables using multiple wire plugins at the same time. Also, we now distinguish between the wire plugin (i.e. EBICS or taler_bank) and the wire method (i.e. SEPA or x-taler-bank) that the wire plugin is implementing. The "taler-bank" wire method was renamed from "test" to "x-taler-bank". This also changes the format of the /wire response of the exchange, as we now need to return multiple accounts. Note that wire fees are specified per wire method, not per wire account. taler-exchange-keyup now automatically signs all of the /wire responses in the location specified by the configuration. Account identification in wire plugins was changed to use payto://-URLs instead of method-specific JSON fields. Signing and validation of /wire responses was moved from each wire plugin to a generic validation method in libtalerutil (crypto) or libtalerjson (for JSON-formatted inputs). Convenience methods were added to generate JSON for wire accounts (salting, signing). Various section and option names were adjusted to streamline the configuration and make it more consistent overall. Documentation was updated as well.
2018-04-02 14:24:45 +02:00
return cmd;
Implement new traits-based tests.
2018-01-23 10:28:24 +01:00
}
Reference in New Issue Copy Permalink